The "littlemaN"™ Mod by Project Sub-Ohm™ Final Prototype Omega Is Sold Out! Stay Tuned For More Innovative and Exciting Products From Project Sub-Ohm™
WARNING!!! FOR USE WITH 30 AMPS OR HIGHER IMR BATTERIES ONLY!
Handmade In The USA
Please Note: This is our Final Prototype Omega. There will be minor cosmetic imperfections due to been a handmade device.
Make sure batteries are in the correct positions (DO NOT PEEL OFF THE BATTERY STICKERS):
- Left battery POSITIVE (+) is facing UP, toward the atomizer.
- Right battery POSITIVE (+) is facing DOWN, toward the bottom of the box mod.
***This listing is for One "littlemaN" Mod Only!
Product Improvements from Beta Version:
- Newest Fat Daddy Adjustable 510 Connection is now installed!
The "littlemaN"™ series by Project Sub-Ohm™ is a culmination and advancement of techonology and concepts that caters to the consummate cloud chaser by providing the ability to output and handle unbelievable power more safely and consistently than any mechanical mod on the market. By integrating a General Electric chip able to constantly and consistently output up to 120 watts of power, the "littlemaN"™ series is the premiere variable voltage device for performance.
By utilizing a bucking voltage system, the "littlemaN"™ is highly efficient in power delivery, with efficiency rating above 90% under load. Combining that with two high capcacity and high amperage rated batteries, the "littlemaN"™ 's longevity can put any mechanical mod to shame.
The "littlemaN"™ can be adjusted from 3.5 - 6.0 volts, while also being able to handle low Sub-Ohm builds even at its highest power setting. Just how powerful? Assuming that you had a near zero voltage drop on a mechanical mod with a .3 Ohm build, you are outputting 4.2 volts to your system. As the battery drops, your performance would reflect that and drop as well. The "littlemaN"™ can not only output 4.2 volts consistently for the length of the two batteries life, but it can go above and beyond, blasting that system with well over 5 volts of power!
Typically higher power is associated with lower safety, and while we don't recommend ultra low Sub-Ohm builds if your all about safty anyways, the "littlemaN"™ has built in over voltage, under voltage, and short circuit protection, providing you with a feature set that dwarfs any mechanical mod on the market.
The "littlemaN"™ also includes an interior screen with a three way selector that, when switched to the appropriate setting, will show you overall battery life, output voltage when firing, and a master off switch for those times when you need to ensure that the "littlemaN"™ won't fire.
- FOR USE WITH 30 AMPS OR HIGHER IMR BATTERIES ONLY!
- Change and reload batteries at the same voltage level, so charge both batteries together and use them together
- Please do not put in your batteries in wrong directions even with the reverse battery protection installed
- Make sure batteries sit completely snug in the battery slots
- Do not use any batteries if the outside wrapper has come off!
- Turn off the device before pulling your batteries out
- Do not wrap your coils below 0.3 ohm and always vape safe!
Warning: Project Sub-Ohm™ is a product design and development studio for Electronic Cigarettes and do not involve in any product manufacturing process. Use this product at your own risk. In no event, regardless of cause shall VaporDNA™ and Project Sub-Ohm™ be liable for any type of bodily injury or property damage. (Full warranty is included with the product for any device malfunctions. Warranty excludes all user related errors like dropping, water damages, chip damages due to super sub-ohm (Below 0.3 ohm) build or put in the batteries in wrong directions etc.)
***Always turn off the device and take the batteries out when not in use!
Advanced User Item. Use AT YOUR OWN RISK!
FOR USE WITH 30 AMPS OR HIGHER IMR BATTERIES ONLY!!!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.