Asmodus C4 24mm BF RDA
Due to the nature of manufacturing and design, each Asmodus C4 24mm BF RDA drip tip colors come in random. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random.
Asmodus presents the C4 24mm BF RDA, a low profile, single coil, bottom fed device with a cyclonic air flow control system. The C4 is 26mm tall and features a 3mm wide and 1mm tall single terminal, dual post build deck with top mounted hex screws. This RDA has dual adjustable air flow through the top cap and has nine 1mm air ports on each side. Each individual air port has been machined at a 25 degree angle which is positioned to maximize the amount of air that comes into contact with the coil. The angled air port design, in combination with the domed top cap is made to create a cyclonic airfow in the RDA. The C4 has a locking barrel design to ensure that the top cap is always aligned properly with the air ports on the build deck. All of the contact points on the C4, as well as the deck is coated in 24K gold in order to maximize conductivity. The split bottom squonk pin directs juice flow to both of the concave juice wells to ensure that juice always properly wicked. The main chassis of the C4 is made of 304 stainless steel and the top cap is made of anodized 6063 aluminum. The Asmodus C4 24mm BF RDA is an excellent atomizer designed with excellent air flow, wicking, and the convenience of the user in mind.
Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.
Monthly Featured E-Liquids
- 24mm Diameter
- Dual Post, Single Terminal Style Build Deck
- 24K Gold Plated Deck
- Top Mounted Hex Screws
- 3mm by 1mm Terminal
- Ultra Low Profile
- Domed Aluminum Top Cap
- Dual Adjustable Cyclonic Airflow
- 9 Air Port Per Side
- Directs Airflow Directly Onto Coil
- 1mm Diameter Per Air Port
- Inlets Are Machined at 25 Degree Angle
- Locking Barrel Design
- Ensures Proper Airflow Alignment
- 24K Gold Plated Bottom Feed 510 Contact
- Standard 510 Pin Option
- Split Bottom Fed 510 Option
- Concave Juice Well
- Stainless Steel and Aluminum Construction
- 304 Stainless Steel Chassis
- Anodized 6063 Aluminum Top Cap
- One Asmodus C4 BF 24mm RDA
- Two Oni Pre-Built 0.2 Triple Fused Clapton Coils
- One Allen Key for Build Deck
- One Allen Key for 510 Pin
- One Gold Plated 510 Pin
- One Gold Plated Split BF 510 Pin
- One Acrylic and Stab Wood 810 Drip Tip
- One Delrin Snub-nosed 810 Drip Tip
- One Spare Parts Bag
- One User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.