Home > Rebuildables > Rebuildable Dripping Atomizers (RDA) >

Asmodus Galatek 24mm RDA

Asmodus Galatek 24mm RDA


 
Images are for illustration purposes only. Actual color, finish and packaging may vary.


List Price: $36.99
Our Price: $34.99
Savings: $2.00

Stock Status: (Out of Stock)

Product Code: ASGALA

Choose Your Atomizer Finish

  
Save on Flavor of the Week

  
Save on Batteries

  
Save on Chargers

  
Save on Wicks

  
Save on Wires

  
Save when purchased together

Coil Master Spinner 1 - SS [Add $8.99]

Avatar VapeNut Vapor Eliminator [Add $109.99]

Chubby Gorilla E-Liquid Bottle (30ml) [Add $1.49]

Coil Master 521 Tab Mini Ohm Meter [Add $18.99]

GeekVape Essential Tool Kit [Add $7.99]

Coil Master Ceramic Tweezer [Add $8.99]

Qty:  
Description
 

Asmodus Galatek 24mm RDA


Asmodus introduces their Galatek RDA, a 24mm diameter, two post build deck with graveyard style posts. Each post has two 2mm terminals per post which utilize side mounted hex screws and the RDA has a 5mm deep juice well. Airflow enters the RDA through dual 8.5mm by 2.5mm airslots that are fully closeable. The Galatek RDA has a unique heat dissipating top cap design with four large venting slots and uses an 11mm wide bore 810 drip tip. Included with the Galatek RDA is a set of two prebuilt fused clapton coils and a bottom feed pin, which will transform the RDA into a bottom feeding atomizer. The Galatek RDA by Asmodus is a unique RDA with a heat dissipating top cap and graveyard style posts.

Quick Links:
Building Materials
Monthly Featured E-Liquids

Product Features:
  • 24mm Diameter
    • Graveyard Two Post Build Deck
    • Two Terminals Per Post
      • 2mm Terminals Per Post
      • Side Mounted Hex Screws
  • Dual 8.5mm by 2.5mm Airflow Channels
  • 5mm Deep Juice Well
  • Double O-Ring Secured
  • PEEK Insulator
  • Dual Bottom Adjustable Airflow
    • 8.5mm by 2.5mm Each Airslot
    • Fully Closeable
  • Heat Dissipating Top Cap Design
    • Four Large Vent Slots
  • 11mm Wide Bore 810 Drip Tip
  • Gold Plated 510 Connection
  • 304 Stainless Steel Construction

Product Includes:
  • Asmodus Galatek 24mm RDA
  • Spare Parts Pack
  • Two Prebuilt Fused Clapton Coils
  • Bottom Feed Pin
  • Allen Key

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.

Advanced User Item. Use At Your Own Risk!

NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.


RiP Trippers Reviews The Asmodus Galatek 24mm RDA

Average Rating: 4 of 5 Total Reviews: 10 Write a review »

  0 of 0 people found the following review helpful:
 
great September 11, 2017
Reviewer: Shelby Reynolds from Davenport, IA United States  
the air flow is great, it's alittle smaller than i was anticipating but i also didn't look at the demenions but overall pretty cool

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Galatek September 8, 2017
Reviewer: Philip Sengele from San Antonio, TX United States  
Awesome rda. Great flavor and good cloud production

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Asmodus Fail... September 3, 2017
Reviewer: JFS from SALT LAKE CITY, UT United States  
Bought this on a whim at the recommendation of a shop. He swore up and down it was amazing. After building it 20 different times in different configurations I have come to the conclusion this RDA is a fail. Building on it is okay, nothing to hard but definitely not as simple as a Velocity Style deck or two post design. Air flow is heavy restricted and honestly not that smooth. I tried Claptons, Fused Claptons, Twisted, Micro, SS, Ni... nothing seemed to aid the quality. Don't let the "cooling cap" trick you either, it gets hot no matter what (because bad air flow). The flavor is good, but that is because of it's restrictive airflow. It also has a tendency to spit juice no matter how you wick it.It's not exactly the prettiest. I tried it on a few mods and it just reminds me of a robot (may be a pro to some, but it looks silly to me).

For the money, I would rather buy other RDAs.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Nice RDA August 19, 2017
Reviewer: Darren Back from Orlando, FL United States  
Nice RDA, a little smaller then I thought it was going to be.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Broken o-rings August 16, 2017
Reviewer: Max Perilous from United States  
The first time I removed the top cap, it broke an o-ring. Good thing it comes with extras. I replaced the o-ring, lubed em up and put the top cap on, broke another o-ring... Vape is decent but it's going to just sit on my desk because I eon't want to break an o-ring every time I use it.

Was this review helpful to you?

View All Customer Reviews