Aspire Archon 150W TC Box Mod
The Aspire Archon 150W TC Box Mod is the dual battery platform of the NX75 that packs in Aspire's flagship chipset that features a highly advanced interface controlled through a five button control interface. Aesthetically, the Archon 150W presents a clean and lightweight chassis, with neutral styling accented with Aspire's signature orange trim. The Archon 150W features an output range of 5 to 150W alongside a full temperature control suite with a three memory TCR mode and onboard support for SS316L, Ni200 Nickel, and Titanium heating elements. The Archon 150W is the second and currently most powerful Aspire system to features the customizable firing button profiles output mode which allows users to set wattage output up and down by the second, allowing for extreme precision. The 0.86 inch OLED Screen packs in a tremendous amount of relevant feedback information, and is activated with an extremely quick auto rotating screen that makes general use intuitive in nature. Implementing the latest in safety technology, users are also able to password lock the device to ensure safe handling and storage. The five button control face with dedicated wattage and temperature buttons alongside an oversized firing button makes navigation and use quick and efficient. With tremendous overall capability alongside an easy to use interface and lightweight chassis, Aspire's Archon 150W TC Box Mod is an excellent contender in the high performance segment.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 1 to 150W Power Output
- 0.1 to 3.5 ohm Atomizer Resistance Range
- 0.00V to 8.5V
- Voltage Output
- Bypass Mode
- 5 to 15S Adjustable Maximum Continuous Firing Time
- Firmware Upgradeable
- Full Temperature Control Output
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel 316L Support
- Three Memory TCR Mode
- Set Own Temperature Coefficient of Resistance
- Fine Tune Output
- 0.1 to 3.5 ohm Atomizer Resistance Range
- Automatic Resistance Lock
- 200 to 600 degrees Fahrenheit Range
- Child Lock Option
- Three Digit Numerical Password
- Ensure Safe Travel and Daily Use
- Customizable Firing Button Profiles
- Three Memory Settings
- Customize Wattage for Each Second of Output
- Intuitive and Easy to Read Graph Display
- Extreme Output Control
- Directly Customizable from Device
- 0.86 Inch OLED Screen
- Battery Life Indicator
- Output Wattage/Temperature/Curve Graph
- Output Mode
- Atomizer Resistance
- Stealth Mode
- Logo Change Feature
- Auto Rotating Screen
- Slide Away Dual Magnetized Battery Bay
- Accepts Two High Amperage 18650 Batteries
- Batteries Not Included
- Five Button Control Face
- Dedicated Wattage and Temperature Buttons
- Dedicated Adjustment Buttons
- Oversized Firing Buttons
- Quickly Adjust and Switch Between Modes
- Spring Loaded 510 Connection
- Automatic Cut-Off/Short Circuit/Low Resistance/Overheat/Overcharge/Over Discharge Protection
- One Archon 150W TC Box Mod
- Micro USB Charging Cable
- User Manuals
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.