Augvape Merlin MTL RTA
Augvape introduces their very first mouth-to-lung rebuildable tank atomizer, the Merlin MTL RTA, sizing at 22mm, a juice capacity of 3ml, and adjustable airflow system of 3.5mm, 2.5mm, 2mm, 1.6mm, and 1.2mm. Airflow can be changed internally with air plugs and can be set from increments of 1.2mm, 1.6mm, 2mm, 2.5mm, or completely open at 3.5mm. The build deck size is 7mm to accommodate small builds that are typically used for mouth-to-lung and two 9mm wicking ports are available to saturate the cotton. Along with the small build deck, coils are held down by two hex screws, under are two additional hex screws and can be adjusted for additional internal side airflow. Airflow enters the Merlin MTL on the bottom via dual adjustable airflows that sizes at 7mm by 1mm each side and can be fully closed. Juice enters the Merlin through two 10mm by 2.5mm juice slots located on the top. The Merlin utilizes two drip tips, a 510 delrin drip tip with a 11mm bore and a 510 stainless steel mouth-to-lung drip tip with a 3mm bore. The Merlin MTL RTA by Augvape creates optimal flavor recreation and great building functionality, making this one of a more versatile rounded mouth-to-lung rebuildable tank atomizer available today.
Monthly Featured E-Liquids
- Threaded Top Fill System
- Two Fill Ports
- 10mm by 2.5mm Each Fill Port
- 3ml E-Juice Capacity
- Two Post, Single Terminal Build Deck
- PEEK Insulated Positive Post
- Top Mounted Hex Screws
- Single Internal Air Tube on Build Deck
- Side Airflow Can be Adjusted
- AIr Plug Customization
- Dual Wicking Ports
- Dual Adjustable Bottom Airslots
- 3mm Bore Stainless Steel MTL Drip Tip
- 11mm Wide Bore Delrin Drip Tip
- Gold Plated 510 Pin
- Merlin MTL RTA
- One Spare Glass Section
- One Stainless Steel MTL Drip Tip
- Four Air Plugs
- One Spare Parts Kit
- One Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.