Augvape Zoom 60W TC Compact Box Mod
Augvape's Zoom 60W TC is a compact platform that packs in a sophisticated Pivape PV058 chipset capable of supporting atomizers down to 0.05 ohms in both VW and TC modes, with a 5 to 60W range and a highly capable 1300 mAh integrated battery with a maximum manufacturer rated output of 35A. Measuring only 37mm by 23mm by 64mm, the Zoom is constructed out of heavy duty Zinc Alloy, presenting a small form factor with considerable durability. Integrated within is Pivape's PV058 chipset, capable of outputting 5 to 60W, 35A, and 7.2V maximum, outclassing other devices within this size segment. Users also have the option of switching between three preset ramp output modes to further fine tune the output depending on preference and need. Ni200 Nickel, Titanium, and SS316L heating elements are natively supported in the Zoom's temperature control mode, with a temperature range of 200 to 600 degrees Fahrenheit. Augvape has integrated an advanced rechargeable Lithium Polymer battery within the chassis, rated at a capacity of 1300 mAh with a charge port capable of a 800 mA maximum charge current. The Zoom's screen is located adjacent to three adjustment buttons, featuring a two row, two column display. Controlling the Zoom is done intuitively through four switches, with two standard adjustment buttons, a dedicated menu button, and an oversized and engraved firing button located near the top of the chassis. Packing in a considerably powerful small form factor chipset, a capable battery, and a sophisticated chipset all within a heavy duty Zinc Alloy chassis, Augvape Zoom 60W TC is a perfect portable device for users needing a high performance system.
- 5 to 60W
- 0.05 to 3.0 ohm Atomizer Resistance Range
- Adjustable in 1W Increments
- 35A Maximum Output
- 7.2V Maximum Output
- Three Preset Ramp Output Modes
- PV058 Pivape Chipset
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS316L Support
- 200 to 600 Degree Fahrenheit Range
- 0.05 to 1.0 ohm Atomizer Resistance Range
- Atomizer Resistance Lock
- Compact Form Factor
- 1300 mAh Built-In Battery
- Chargeable Via Micro USB Port
- 800 mA Charge Current
- Passthrough Technology
- OLED Display
- Two Row Two Column Arrangement
- Atomizer Resistance
- Battery Life Indicator
- Output Wattage
- Output Voltage
- Output Temperature
- Working Mode
- Four Button Control Face
- Oversized Firing Button
- Adjustment Buttons
- Menu Button
- Gold Plated 510 Thread Point
- Spring Loaded 24K Gold Plated 510 Connection
- Zinc Alloy Construction
- 20 Second Cut-Off/Short Circuit/Atomizer/Low Battery/Overheat Protection
- One Augvape Zoom 60W TC Box Mod
- One Micro USB Charging Cable
- User Manual
- In order to use temperature control output, coils must be built using non-resistant wire.
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.