Boomstick Engineering Reaper 18mm BF MTL RDA
Designed in Italy
Boomstick Engineering presents the Boomstick Engineering Reaper 18mm BF MTL RDA, a low profile bottom-fed, dual coil RDA with high grade stainless steel construction, and several heat dissipation features. The build deck has a post located on each side of the atomizer with top mounted slotted flathead screws that secure gold plated gaskets and a PEEK insulated positive post. The Reaper has a dual chambered top cap, made up of an internal chamber for heat dissipation and the rifled top cap for airflow adjustment. The top cap has two air ports to correspond with the three air ports in the internal chamber; allowing for either dual air flow for dual coil builds or single air flow for single coil builds. In addition to the stainless steel construction that keeps the Reaper cool in prolonged use, the 22mm ULTEM beauty ring and drip tip also contribute to the heat dissipation of the atomizer. The standard 510 contact point and the bottom feeding pin are both gold plated and easily interchangeable to easily pair the Reaper with any mod. The Boomstick Engineering Reaper 18mm BF MTL RDA is a flexible, low profile atomizer to pair with any mod!
Monthly Featured E-Liquids
- 18mm Diameter
- Dual Post, Top Mounted Gasket Build Deck
- Peek Insulated Positive Post
- Top Mounted Flathead Screws
- Gasket Secured Build Style
- Supports Dual or Single Coil Builds
- Top Cap with Secondary Internal Chamber
- Three Adjustable Side Airflow Ports
- Dual / Single Airflow Options
- Dual Wicking Ports
- Gold Plated 510 Threaded Contact Point
- Optional Threaded Bottom Fed Pin
- Ultem Drip Tip
- SS304L Stainless Steel Construction
- One BoomStick Reaper MTL RDA
- One Spare Drip Tip
- One 18/22mm Beauty Ring
- Spare Parts
- One User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.