Boxer Mod Classic DNA 75C Bottom Feed 2X700 TC Box Mod
Boxer Mods comes in with their 3D printed Boxer Mod Classic DNA 75C Bottom Feed 2X700 TC Box Mod, a regulated squonk box mod device that is equipped with the newest Evolv DNA 75C Color chipset, built in Escribe software and a silicon squonk bottle, and utilizes either 20700 or 21700 batteries (sold separately). The Boxer Mod Classic BF is made out of nylon plastic, making it light yet durable. With a capability of 75W maximum output, temperature control suite, a single high amperage 20700 or 21700 battery (sold separately) and a fresh take on bottom feeding devices by introducing a 7ml silicone style squonk bottles that rests comfortably in front of the battery. The squonk bottle can be easily refilled by taking off the atomizer and replacing it with the 30ml refill bottle (sold separately). Prior to installing the squonk bottle into the device, the squonk tube should be cut to size. The control face features the a four button interface, with an oversized firing button and three adjustment buttons. The Boxer Mod Classic is equipped with Evolv's newest Evolv DNA 75C Color chipset and has a 0.96 inch Full Color TFT Screen which displays essential data in a new and improved way. The battery door of the Boxer Mod Classic can be easily removed by lifting the tab via the opposite side of the bottle access hole. With its full color TFT screen combined with built in Escribe software, and their brand new silicon bottles, and a light yet durable 3D printed chassis the Boxer Mod Classic DNA 75C Bottom Feed 2X700 TC Box Mod is an ideal squonk device for many vapers looking into high end mods.
Please Note: Never use damaged or improperly wrapped batteries with this device.
Shop Bottom Feed Atomizers
Shop EBAT 20700 Battery
Monthly Featured E-Liquids
Replacement Squonk Bottle
- DNA 75C Chipset
- Official Evolv DNA 75C Color Chipset
- 1 to 75W Output
- 30A Maximum Continuous Output
- Built In Escribe Software
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- 200 to 600 Degrees Fahrenheit
- Squonk Ready Stainless-Steel 510 Connection
- Single 20700 or 21700 Platform
- Gold Plated Spring Loaded Contacts
- Batteries Sold Separately
- 7ml Silicon Refilling Bottle Rests Behind Battery
- Easily Refillable with a Threaded 30ml Refilling Squeeze Bottle
- Sold Separately
- Four Button Control Face
- Oversized Firing Button
- Rectangular Adjustment Buttons
- 0.96 Inch Full Color TFT Screen
- Displays Essential Data Neatly
- Check Atomizer
- Weak Battery
- Check Battery
- Temperature Protected
- Ohms Too High/ Too Low
- Too Hot
- Adjustable via Escribe
- Escribe Companion Software
- Micro USB Port
- 1A Charging
- Firmware and Software Upgrade
- Stainless Steel 510 Thread Point
- Stainless Steel 510 Contact
- One Boxer Mod Classic DNA 75C Bottom Feed Box Mod
- Two 7ml Silicon Squonk Bottle
- One Carrying Case
- Micro USB Cable
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.