Coil Art DPro Mini 22mm RDA
The Coil Art DPRO RDA is a 22mm diameter atomizer with a creative postless deck and length extended airflow system. There are two terminals at the base of the deck for coil leads that utilize side mounted hex screws and the 24K gold plating allows for greater conductivity. Airflow enters the DPRO Mini RDA via two side air holes that measure 3mm in diameter and are adjustable. The airflow then travels down a length extended airflow system that is angled towards the coils for perfect airflow capability inside the RDA. Included with the DPRO RDA is are 6mm bore 510 ULTEM drip tip with a tighter draw than other 510 drip tips, allowing for enhanced flavor intake and a bottom feed pin that converts the DPRO Mini RDA into a bottom feeding atomizer. Utilizing a postless, yet straightforward build deck, a smaller bore drip tip and airflow holes, the Coil Art DPRO Mini RDA is the perfect RDA for those looking for a more flavor based RDA!
Monthly Featured E-Liquids
- 24mm Diameter
- Single Coil Postless Deck
- Dual Terminals At Base of Deck
- 3mm by 4mm Each Terminal
- Side Mounted Hex Screws
- 3mm Deep Juice Well
- Double O-Ring Secured
- 24K Gold Plated Deck
- PEEK Insulator
- Length Extended Airflow System
- Dual Adjustable Side Airflow
- Airflow Angled Towards Coils
- 3 Diameter Each Air Hole
- 8mm Bore 510 ULTEM Drip Tip
- Bottom Feed Pin
- 24K Gold Plated 510 Connection
- One Coil Art DPro Mini 22mm RDA
- Extra O-Ring and Screw Pack
- One Bottom Feed Pin
- One Pair Prebuilt Clapton Coils
- Two 510 Drip Tip
- Hex Key
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA® will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
RiP Trippers Reviews the DPRO Mini RDA by Coilart!