DigiFlavor x The Vapor Chronicles Drop 24mm RDA
DigiFlavor and The Vapor Chronicles introduce their Drop RDA, a 24mm, four post rebuildable atomizer with a gold plated built deck and stepped airflow design. Each of the four posts house a single 3.5mm terminal, which allow for easy coil placement and maximum build space with open access to trim excess. Airflow enters the drop through a "T" shaped airslot fitted with 10 air holes per side and can be fully closed. The Drop RDA comes with a pair of 810-fitted wide bore drip tip and a 510 drip tip adapter for a fully customizable experience. The gold-plated 510 connector can be switched out to a squonk-ready 510 pin to use with any of your preferred Bottom Feed devices. The Drop RDA by DigiFlavor and The Vapor Chronicles displays true versatility and customizability in today's market.
Monthly Featured E-Liquids
- 24mm Diameter
- Four Build Deck
- Single Terminal Per Post
- Side Mounted Flathead Screws
- 3.5mm Each Terminal
- Gold Plated Deck
- PEEK Insulator
- 5mm Deep Juice Well
- Stepped Airflow Design
- Gold Plated 510 Contact
- 810 Drip Tip Fitment
- 9mm Bore Acrylic Drip Tip
- 10mm Bore ULTEM Drip Tip
- 510 Drip Tip Adapter
- Standard 510 Pin
- Raised Bottom Feed Pin Included
- One DigiFlavor x The Vapor Chronicles Drop 24mm RDA
- One 9mm Bore Acrylic 810 Drip Tip
- One 10mm Bore ULTEM 810 Drip Tip
- One T-Tool
- One Bottom Feed Pin
- Spare Part Pack
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
RiP Trippers Favorite RDAs 02-09-2018!
RiP Trippers Reviews of The DROP RDA! It Just Got Real!