Dovpo M VV 300W Box Mod
Dovpo introduces the M VV 300W Box Mod, a 300W capable, dual 18650 battery (sold separately), potentiometer controlled box mod. The device has a 1.0 to 8.0V output voltage with a 35A maximum current output and features a no screen display. The M VV Box Mod features a single firing button and an LED battery life indicator light alongside reverse polarity protection, low voltage, overheat and over current protection. The M VV Box Mod comes in four different colors; red, black, and blue with a crackle design, and one in special edition. With its high power capability, the M VV Box Mod is an ideal device for all rebuildable atomizers.
Shop All Batteries
Shop All Rebuildable Atomizers
Monthly Featured E-Liquids
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 300W Capable
- 1.0 to 8.0V Output Voltage
- 35A Max Current Output
- Modular Battery Platform
- Two 18650 Battery Operation
- Magnetized Battery Door
- M VV Chipset
- No Screen Display
- Potentiometer Controlled
- Reverse Polarity/Atomizer Short/Low Voltage/Overheat/Over Current Protection
- Spring Loaded Contacts
- LED Battery Life Indicator Light
- Single Oversized Firing Button
- Zinc Alloy Construction
- Stainless Steel 510 Thread Point
- One Dovpo M VV 300W Box Mod
- User Manual and Warning Card
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.