Dovpo x TVC Topside 90W Squonk Box Mod
The Dovpo x TVC Topside 90W Squonk Box Mod is the product of the collaboration with The Vapor Channel in the endless pursuit of a greater vaping experience. The Topside 90W Squonk Box Mod is the world's first top filled squonk bottle. The Dovpo x TVC Topside has a wattage output range of 5 to 90W, a resistance range of 0.08 to 3.5 ohm, and a voltage output range of 1.0 to 8.5V. The Dovpo Topside has VW output mode and bypass mode. The Topside does not come with a temperature control suite out of the box, but can be upgraded through the official Dovpo site. The temperature control suite supports Ni200, Titanium, and SS316 heating materials. The Topside has a temperature output range of 200 to 600 Degrees Fahrenheit and a 0.05 to 1.5 ohm TC resistance range. This box mod has a 0.96 inch OLED screen with vertically arranged information that displays output mode, output wattage, output voltage, atomizer resistance, output current, and battery life indicator. The Topside's unique selling point is its threaded top filled 10ml squonk bottle built into a plastic casing. The knurled top cap conveniently allows refilling without removing the squonk bottle casing from the device. A spare squonk bottle comes with the purchase of a Topside Box Mod. Due to the nature of manufacturing, this spare casing will arrive in a separate container. The Topside features a three button control interface consisting of an over-sized firing button and two adjustment buttons. The battery cover is a simple slide-to-lock design and fits one 21700, 20700, or 18650 battery with an adapter. The Topside has a micro USB port along the side which allows for charging and software updates. The Topside Box Mod has a gold-plated, spring loaded 510 connection with a leak resistant base. The Dovpo x TVC Topside 90W Squonk Box Mod is an excellent device featuring a solid zinc alloy, aluminum alloy, and stainless steel construction with a revolutionary squonking method that is sure to set the trend for manufacturers to come.
Shop All Batteries
Monthly Featured E-Liquids
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 5 to 90W Output Range
- 0.08 to 3.5 ohm Resistance Range
- 1.0 to 8.5V Output Range
- Temperature Control Suite
- Software Upgrade Required
- Ni200 Nickel Support
- Titanium Support
- SS316 Support
- 200 to 600 degree Fahrenheit Range
- 0.05 to 1.5 ohm TC Resistance Range
- Output Modes
- Power Mode Output
- Bypass Mode Output
- Temperature Control Output
- Software Upgrade Required
- .96 OLED inch Screen
- Vertical Arrangement
- Output Mode
- Output Wattage
- Output Voltage
- Atomizer Resistance
- Output Current
- Battery Life Indicator
- 10ml Top Filled Squonk Bottle
- Threaded Top Cap
- Squonk Bottle Built Into Plastic Casing
- Extra Bottle Kit Included with Purchase
- Arrives in Separate Container
- Three Button Control Face
- Oversized Firing Button
- Two Adjustment Buttons
- Sliding Battery Door
- Accepts One High Amperage 18650, 20700, 21700 Battery
- Batteries Sold Separately
- 18650 Battery Adapter Included
- USB Port
- Gold Plated 510 Threading and Firing Pin
- Spring Loaded Gold Plated Center Pin
- Gold Plated Contact Points
- Leak Resistant 510 Base
- Device Safety Features
- Overtime Protection/Atomizer Checking/Low Power/Short Atomizer/High or Low Resistance Warning/Overheat Protection
- One Dovpo Topside Box Mod
- One Dovpo Extra Bottle Kit
- One Micro USB Cable
- One 18650 Adapter
- User Manual and Warranty Card
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.