Eleaf iStick Nowos 80W Starter Kit
Due to the nature of manufacturing, this starter kit's components will arrive in individual packaging. The iStick Nowos Box Mod and ELLO Duro Sub-ohm Tank will arrive individually packaged.
Due to the nature of manufacturing, each ELLO Duro Sub-Ohm Tank Drip Tip will have a unique color and resin pattern. Pictures provided on the product page should be taken as a point of reference. Each sub-ohm tank will be sent randomly.
The Eleaf iStick Nowos 80W TC Starter Kit is a convenient starter kit that has a 4400 mAh built in battery, 80W maximum power output, and USB-C quick charging! It is paired with the ELLO Duro Sub-Ohm Tank that has a maximum e liquid capacity of 6.5ml and is compatible with the HW replacement coil family that utilizes the flavorful mesh and net coil technology.
The iStick Nowos Box Mod has a wattage output of 1 to 80W. This power output can be adjusted by pressing the over-sized firing button three times, which activate the two panel-integrated buttons that are indicated by single LED buttons. The left LED is to decrease, while the right is to increase power output. The Nowos features a unique display that is fully integrated into the panel of the device. This display shows atomizer resistance, remaining battery power, and current wattage output. This box mod features a built-in 4400mAh battery that can be charged with a USB-C cable at a rate of 2A and can reach maximum capacity in and hour and 20 minutes. The Nowos also has a recessed reset button in case of hardware issues. The Ello Duro Sub-Ohm Tank included with this starter kit has a 25mm in diameter at the base and is 28mm with the 6.5ml bubble glass installed. The e liquid can be refilled through the push top fill port. The Ello Duro comes with an HW-N Dual 0.25 ohm Mesh Coil best used at 25 to 65W and a HW-M Dual 0.2 ohm Mesh coil best used at 25 to 60W. It is also compatible with the rest of the HW Replacement coil family. This sub-ohm tank has three fully adjustable 11mm by 4mm air slots that can be adjusted with the bottom air flow ring. The Eleaf iStick Nowos Starter Kit is a great starting setup with a powerful battery and well supported sub ohm tank platform.
HW Series Replacement Coils
Monthly Featured E-Liquids
Eleaf iStick NOWOS Features:
- 1 to 80W Power Output
- Panel Integrated LED Display
- Output Wattage
- Atomizer Resistance
- Built-in 4400mAh Battery
- USB-C Charging Port
- Supports Three Modes of Charging
- Three Button Interface
- Over-sized Firing Button
- Panel Integrated Adjustment Buttons
- Press Firing Button Three Times to Activate Adjustment Buttons
- LED Indicator on Buttons
- Spring Loaded 510 Connection
- Recessed Reset Button
Ello Duro Sub-Ohm Tank Features:
- 25mm Diameter
- 6.5ml Bubble Glass Tank Section
- Push Top Fill System
- HW Coil Family
- HW-N 0.2 ohm Coil
- 50 to 130W
- Net Coil
- HW-M 0.15 ohm Coil
- 50 to 100W
- Multihole Coil System
- Triple Adjustable Bottom Airflow
- 14mm Bore 810 Drip Tip
- One Eleaf iStick Nowos 80W Box Mod
- One Ello Duro Atomizer
- One HW-N Dual 0.25 ohm Coil
- One HW-M Dual 0.2 ohm Coil
- One Spare Glass Segment
- Spare Parts Kit
- QC Micro USB-C Charging Cable
- Two User Manuals
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.