GeekVape Ammit 22mm MTL RDA
GeekVape presents the Ammit 22mm MTL RDA, a single coil Mouth-to-Lung RDA with a unique 3D air flow and a dual chambered top cap for a versatile vaping experience. The build deck sports a dual post, single terminal deck, with top mounted Phillips screws and a PEEK insulated positive post. The Ammit's unique 3D airflow consists of a dual chambered top cap for heat dissipation and directing airflow from the air ports located on the top ring of the cap directly to the coil. The top cap has an adjustable ring with two different air ports; one 12mm wide air port that allows for more airflow, and 2mm air port on the other side of the ring for a tighter draw. These two types of air ports allow up to 12 different configurations. The drip tip for the Ammit is threaded and must be screwed on to the drip tip base. The drip tip base has two o-rings allowing it to be easily removed for easily re-wetting the installed coils. The GeekVape Ammit 22mm MTL RDA has dual wicking ports that lead into a 9mm deep juice well that complements both bottom fed and drip builds. This package comes with three interchangeable drip tips: a 3mm Delrin Tip, a 2mm Delrin tip, and a 3mm Stainless Steel Tip. The Ammit has a recommended wattage range of 15 to 20W. The contact point for the Ammit is a standard gold plated 510 pin. The GeekVape Ammit is a beautifully designed MTL RDA for users looking for a tighter and unique vaping experience!
Monthly Featured E-Liquids
- 22mm Diameter
- Two Post, Single Terminal Build Deck
- PEEK Insulated Positive Post
- Top Mounted Phillips Screws
- Top to Bottom Adjustable 3D Air Flow
- Directs Airflow from Top to Coil to Driptip
- Dual-Chambered Top Cap for Airflow and Heat Dissapation
- 12 Airflow Configurations
- 12mm Notched Airflow Adjustment Ring
- 2mm Narrow Air Port
- Recommended Wattage of 15 to 20W
- Dual Wicking Ports
- Three Threaded MTL Drip Tips to Choose From
- Short 3mm Diameter Delrin
- Short 2mm Diameter Delrin
- Tall 3mm Diameter Stainless Steel
- Easy to Remove Drip Tip Base
- Gold Plated 510 Threaded Contact Point
- One Ammit 22mm MTL RDA
- One 3mm Stainless Steel Drip Tip
- One 2mm Drip Tip
- One 3mm Drip Tip
- One Allen Key
- One Spare Parts Pack
- One Flathead Screwdriver
- Two Clapton Coils (0.7 ohm)
- One User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
RiP Trippers Reviews The AMMIT MTL RDA By Geek Vape!