Home > Rebuildables > Rebuildable Dripping Atomizers (RDA) >

New!  GeekVape Baron 24mm BF RDA
GeekVape Baron 24mm RDA

Images are for illustration purposes only. Actual color, finish and packaging may vary.

List Price: $29.99
Our Price: $24.99
Savings: $5.00

Stock Status: In Stock

Product Code: GKVBRN

Choose Your Atomizer Finish
Click to view another Choose Your Atomizer Finish

Save on Flavor of the Week

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when purchased together

Coil Master 521 Mini V2 Ohm Meter [Add $18.99]

Coil Master DIY Kit Mini [Add $24.99]

HOMAN II DIY Vape Dock [Add $28.99]

KIZOKU Cell Atty Stand - Black [Add $3.99]

VPDAM V2 20ml Refill Bottle [Add $18.99]

Easy Fill Squonk Cap - 60ml - Silver [Add $7.99]


GeekVape Baron 24mm BF RDA

GeekVape presents the Baron RDA, a 24mm wide bottom feed rebuildable dripping atomizer that features a notched external locking cap and a multifunctional internal airflow system that works seamlessly in unison. The multifunctional internal airflow system can be changed and locked in place whilst the top cap is used as the airflow control system. The build deck of the Baron features dual post single terminal style build deck and has an ample 6mm deep juice well. The Baron also comes with a bottom feed 510 squonk pin that can be interchanged with a regular 510 pin.

The GeekVape Baron 24mm BF RDA is a 24mm rebuildable atomizer that focuses on it's smooth completely versatile internal airflow system. The internal airflow system is secured with a single O-Ring and two pairs of notches that aligns the segment parallel to the coil. The first pair of airflow slots are the four (4) slotted airflow system measures at 5mm by 1.5mm per slot and matches the external locking top cap's slotted airflow. The second set of airflow slots are twelve (12) 1.5mm airflow slot system. The top cap is secured via double O-rings and a wider notch to allow airflow control. The top cap features the same four slots measuring at 5mm by 1.5mm on each side. Located on the top of the atomizer is a proprietary reverse O-Ring 810 Drip Tip and comes with two kinds in the package. The resin 810 drip tip measures at 7mm bore whilst the PEI 810 drip tip measures an 8mm bore. Located on the bottom of the Baron is a gold plated 510 pin that can be interchanged with a bottom feed pin for your squonking needs. The build deck of the Baron is a simple dual post single terminal configuration with ample room for either round wire or clapton wire. Each wire is held down by top mounted flat head screws. The bottom of the build deck features dual 1mm slots for bottom feed functionality, the PEEK insulator, and features a 6mm deep juice well. Included with the Baron RDA are two pairs of cotton, a pair of clapton wires, spare parts bag, and a 510 drip tip adapter.Enjoy the GeekVape Baron 24mm BF RDA with the choice of having the configuration of either a slotted airflow or honeycomb style airflow on either a squonk box mod or any mod at all!

Quick Links:
Building Materials
Monthly Featured E-Liquids

Product Features:
  • 24mm Diameter
    • 21.8mm Tall Without Drip Tip
    • 28.8mm Tall With Included Drip Tip
  • Dual Post Single Terminal Style Build Deck
    • Top Mounted Flat Head Screws
    • 2.5mm by 3mm Terminals
    • 6mm Deep Juice Well
    • PEEK Insulator
    • Juice Flow Splitter in Center
  • External Locking Top Cap
    • Slotted Airflow
      • Four 5mm by 1.5mm Air Slots Per Side
    • Domed Internal
    • Notch Secured
      • Wider Notch Lock Space for Airflow Control
  • Multifunctional Internal Airflow System
    • O-Ring and Notched Secured
    • Slotted Configuration
      • Four 5mm by 1.5mm Air Slots Per Side
    • Honeycomb Configuration
      • Twelve 1.5 Air Holes in Honeycomb Configuration
  • Gold Plated 510 Contact
    • Squonk-Ready 510 Pin
  • 304 Stainless Steel
  • 810 Drip Tip
    • 7mm Bore Resin Drip Tip
    • 8mm Bore PEI Drip Tip

Product Includes:

  • One GeekVape Baron RDA
  • One Agleted Cotton Strip
  • One PEI Acrylic 810 Drip Tip
  • One 510 Drip Tip Adapter
  • One Flathead Screwdriver
  • One Hex Key
  • One Pair of Pre-Built Coils
  • Spare Parts and O-Rings
  • One T-Tool
  • User Manual

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.

Advanced User Item. Use at Your Own Risk!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.