Home > Devices > All DNA Box Mods > DNA 200 Box Mods >

HCigar VT133 DNA 200 Box Mod
HCigar VT133 DNA 200 133W Box Mod

Alternative Views:

List Price: $189.99
Our Price: $159.99
Savings: $30.00

Stock Status: (Out of Stock)

Product Code: HVT133

Save on Flavor of the Week

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when buy together

VaporDNA™ Edition Unicorn Refillable E-Juice Bottle (30ml) [Add $1.25]

UD Builder's Choice Six Piece Screwdriver Set [Add $5.99]

Coil Master 521 Tab Mini Elite Ohm Meter [Add $18.99]

Black Coil Magician Automatic Coil Jig [Add $28.99]

Coil Master Ceramic Tweezer [Add $8.99]

VaporDNA™ VapeBand™ [Add $1.49]

HCigar VT133 DNA 200 133W Box Mod

The HCigar VT133 Box Mod is the evolution of use with the DNA 200 chip set, throttling down maximum output wattage to 133W while simultaneously keeping the ultra sophisticated output technology and drastically improving usability by utilizing two 18650 battery cells (sold separately) in series. The chassis of the VT133 sees a re-envisioned design that keeps the core elliptical arc design of the VT series while utilizing durable Zinc Alloys in the construction. The largest change is the sliding battery access that allows easy accessibility to the battery compartment, now powered via two high amperage 18650 batteries. This drastically increases range, as users can now swap paired batteries on the fly without having to primarily rely on the Micro USB charging port. HCigar utilizes a full sized DNA 200 downthrottled due to the change in power bank from 1 to 133W with an incredible efficiency rating of 97%. Coupled with the Escribe software (link for download will be provided below), the VT133 maintains the high level of sophistication and customization present in the flagship Evolv board while still providing sufficient power to drive Sub-Ohm Tanks, RTAs, and RDAs. One of the key features of the DNA 200 is the precision and capability of it's temperature control settings, which can be fine tuned, diagnosed, and adjusted through Escribe. Combining the sophistication of the DNA 200 with one of the very first dual 18650 platforms to power it, the HCigar VT133 DNA 200 Box Mod is an extraordinary balance of price, feature set, form factor, and performance.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

VT133 Product Features:
  • Official Evolv DNA 200 Chip Set
    • Throttled to 133W
    • Powered by Two 18650 Batteries (sold separately)
  • Snug Fit Sliding Battery Access Door
    • Silver Plated Contacts
    • In Series
    • Battery Ejection Ribbon
  • Elliptical Arc Design
  • Zinc Alloy Construction
  • Ergonomic, Light, and Hand Friendly Design
  • Micro USB Charging and Escribe Connection Port
  • Stainless Steel 510 Threadpoints
  • Silver Plated Contact Pin
  • Three Button Adjustment
    • Knurled Adjustment Buttons
    • Black Buttons

DNA 200 Features:
  • 1 to 133W Output Range
    • 100W Kanthal Range (Able to be changed through Escribe)
    • 133W Max Temperature Range
  • 1 to 6V Output
  • 0.1 to 2.0 ohm Kanthal Resistance Range
  • 0.08 to 1.0 ohm Temperature Sensing Range
  • Temperature Range
    • 200 to 600 Degrees Fahrenheit
  • Cell by Cell Monitoring
  • Cell Balancer
    • 1A USB Charger
  • Atomizer, Weak Battery, Temperature, Resistance, Auto Power Down, and Heat Protection
  • Escribe
  • Autosensing Temperature Resistance
  • Lock Mode
  • Stealth Mode
  • Power Lock Mode
  • Power Preset Mode
  • Resistance Lock
  • Max Temperature Adjustment
  • Efficiency
    • 97%
  • Input Voltage
    • 6 to 8.2V
  • Input Current
    • 0.5 to 23A
  • Screen On Current
    • 18mA
  • Quiescent Current
    • 4.5mA
  • Power Down Current
    • 5uA

Product Recommendations:
  • In order to use temperature control output, coils must be built using non-resistant wire. Evolv recommends Ni200.
  • Please refer to Escribe documentation for walkthroughs and information on how to utilize Escribe.

***Always turn off the device and take the battery out when not in use!

Advanced User Item. Use AT YOUR OWN RISK!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.

Average Rating: 5 of 5 Total Reviews: 8 Write a review »

  0 of 0 people found the following review helpful:
Super mod June 18, 2016
Reviewer: Anonymous Person from Champaign, IL United States  
Everything I expected and more. The board is great. Super service

Was this review helpful to you?

  0 of 0 people found the following review helpful:
would order from these guys again March 19, 2016
Reviewer: Michael hathcoate from Cotati, CA United States  
Super light wait , great design, once you go with DNA 200 chip nothing else matches up. One of my favorite mods now.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Excellent mod! March 19, 2016
Reviewer: Gregory Palmer from Seminole, FL United States  
The DNA 200 is a great chipset. This mod is aimed at the folks who don't need the full 200 Watts the DNA 200 offers and find the greater capacity and ease of changing 18650s is more important.

The DNA 200 is highly costomizable.

The 18650s give you more capacity than a lipo.

The DNA 200 chipset is efficient enough I can notice the battery life increase using this.

The case dissipates heat very well.

Battery changes are fast and it is possible to remove batteries without damaging the wrapper.

Case is heavy (I personally like it)

USB battery charging is limited to 2/3 amp (the DNA 200s built in 1 amp charger splits that current 3 ways even with 2 batteries).

I find the default settings are suboptimal and require tweaking in Escribe before this mod hits its stride (of course, this mod LETS you tweak them which is a big plus in its favor)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Awesome March 16, 2016
Reviewer: Jvape78 from Machesney Park, IL United States  
Love this mod.  I've had the majority of factory made dna 200 mods and I love this thing!  Throw in a pair of 3000mah batteries and you'll be sitting around 19 watt hours of vaping awesomeness.  The ease of changing out 18650 batteries is well worth losing 67 watts of power that I'll never need.  If you get this mod you will need to edit a few things in escribe though.  The battery bar is set at 14wh and should be changed to meet your battery selection.  Also you need to input mod resistance and a few other inputs to make it run at top performance for temp control function.  All of those inputs can easily be found in the evolv forums on the evolv website.  Type in vt133 and should be able to find them.  The unit works just fine if you don't change anything but I like my mods running at max performance.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
VT 133 March 10, 2016
Reviewer: Stephen Sparks from Commerce, TX United States  
Love this mod.  Does everything I want it to.  Quality build and do price

Was this review helpful to you?

View All Customer Reviews