HCigar VT250S DNA 250 Box Mod
HCigar's VT250S DNA 250 Box Mod is a 2/3 battery device with the current flagship chip from the world's most respected chip manufacturer, Evolv's DNA 250. Featuring a stylish automotive grade finish with brushed stainless accents, the VT250S DNA 250 retains the industry changing three battery powered design with the ability to convert to two batteries, offering one of the most well reviewed and beloved form factors and ergonomics available. The VT250S features an interchangeable battery access door to allow the device to be ran in a two battery configuration with a 167W max output. Evolv's DNA 250 is the current flagship from a line-up widely considered to be the most advanced and sophisticated chipset manufacturer today, featuring a tremendous output range from 1 to 250W with an industry leading 97% power efficiency rating. Coupled with the extended output range is the benchmark in Temperature Controlled output, with near limitless support and configurations available when used with the companion Escribe application. The result is the ultimate in output technology that combines efficiency, range, versatility, and customization. The striking appearance of the HCigar VT250S DNA 250 Box Mod paired with Evolv's most powerful chipset and a convertible battery design, makes this mod the most versatile device from HCigar.
Monthly Featured E-Liquids
All Sub-Ohm Tanks
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- Evolv DNA 250 Powered
- 1 to 250W Output Range
- 1 to 167W Output Range
- Firmware Upgradeable
- See Below for Full Specifications
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- Additional Settings Configured Through Escribe
- 200 to 600 Degrees Fahrenheit
- 2/3 Battery Design
- Three 18650 With Standard Door
- Two 18650 With Compact Door
- Spring Loaded Contacts
- Batteries Sold Separately
- Allows for Easy Exchange and Replacement
- Gold Plated Contacts
- Three Button Control Face
- Oversized Firing Button
- Classic Button Arrangement
- Unique Brushed Stainless Accents
- Stylish and Unique
- Textured Control Face and Battery Access Panel
- 0.91 Inch OLED Display Screen
- Displays Essential Data Neatly
- Adjustable via Escribe
- Escribe Companion Software
- Stainless Steel 510 Thread Point
- 24K Gold Plated Spring Loaded 510 Connection
- Three Battery Mode
- Two Battery Mode
DNA 250 Features:
- 1 to 250W Output Range
- 1 to 9.3V Output
- 0.1 to 2.0 ohm Kanthal Resistance Range
- 0.08 to 1.0 ohm Temperature Sensing Range
- Temperature Range
- 200 to 600 Degrees Fahrenheit
- Cell by Cell Monitoring
- Cell Balancer
- Atomizer, Weak Battery, Temperature, Resistance, Auto Power Down, and Heat Protection
- Autosensing Temperature Resistance
- Lock Mode
- Stealth Mode
- Power Lock Mode
- Power Preset Mode
- Resistance Lock
- Max Temperature Adjustment
- Output Current Continuous Max
- Output Current Instantaneous Peak
- Input Voltage
- Input Current
- Screen On Current
- Quiescent Current
- Power Down Current
- In order to use temperature control output, coils must be built using non-resistant wire. Evolv recommends Ni200.
- Please refer to Escribe documentation for walkthroughs and information on how to utilize Escribe.
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.