Home > Rebuildables > Rebuildable Dripping Atomizers (RDA) >

Indestructible Atty RDA by JayBo Designs (American Made by A Legend In Design)

Indestructible Atty RDA Rebuildable Dripping Atomizer by JayBo Designs

Images are for illustration purposes only. Actual color, finish and packaging may vary.

Our Price: $49.99

Stock Status: (Out of Stock)

Product Code: JAYBO1

Save on Flavor of the Week

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when purchased together

Coil Master Spinner 1 - SS [Add $8.99]

Avatar VapeNut Vapor Eliminator [Add $109.99]

Chubby Gorilla E-Liquid Bottle (30ml) [Add $1.49]

Coil Master 521 Tab Mini Ohm Meter [Add $18.99]

GeekVape Essential Tool Kit [Add $7.99]

Coil Master Ceramic Tweezer [Add $8.99]

The Indestructible Atty by JayBo Designs follows its title, bringing together top quality materials, specially designed negative posts, specially designed airflow and top level manufacturing all at an incredible price!

Made in the USA

The Indestructible Atty by JayBo Designs is the evolution from the critically acclaimed TOBH Atty, with an emphasis on not only improving overall design, durability, and functionality, but also competitively pricing the Indestructible Atty to a whole new market. Airflow has been designed at a specific height in an effort to maximize the overall effectiveness with nearly every type of coil configuration, with dual 3mm holes on each side, for a consistent and smooth vaping experience. A single airhole option is also integrated for single coil builds. The airflow couples with the tapered negative post edges, and with appropriate builds, can be used in conjunction to adjust airflow accordingly. Renowned for bringing three part RDA's to a completely new level, the Indestructible Atty continues this line, with a small recess at the top cap allowing for easy removal and adjustment, with a sloped inner top cap for effective vapor delivery. The Negative posts feature a cutaway, flat bottom that allows extremely secure seating on the internal post shelf, greatly increasing wire contact and security while also allowing for a myriad of build configurations. Handmade SS screws are pitched specifically for the positive and negative posts, with the positive screw tapered for maximum shelf contact. The deck also features deepened juice well recess measuring out at approximately 6mm. Manufactured out of 303 Stainless Steel, the Indestructible Atty follows its title, utilizing PEEK insulators rated at an operating temperature of 480 degrees Fahrenheit, Buna-N o-rings, pure C101 Copper for the contact screw for maximum conductivity, and a non fully hollow positive post. Stylish, functional and built to last, the Indestructible Atty by JayBo Designs is one of the premier RDAs on the market!

Product Features:
  • 22mm Diameter
  • Dual 3mm Airholes (6mm Each Side)
  • Single 3mm Airhole for Single Coil Builds
  • Three Part Design
    • Recess at Top Cap for Easy Removal
  • Sloped Inner Cap for Effective Vapor Delivery
  • Cutaway, Flat Bottom Deckmilled Negative Posts
  • Non-Fully Hollow Center Post
  • Handmade SS Screws
  • 303 Stainless Steel
  • PEEK Insulator
  • C101 Copper Contact
  • Buna-N O-Ring
  • JayBo Engraving

***Please be sure to clean your atomizer before use***

Advanced User Item. Use at Your Own Risk!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.

Average Rating: 5 of 5 Total Reviews: 8 Write a review »

  0 of 0 people found the following review helpful:
Would have bought this to replace my TOBH but.... August 24, 2015
Reviewer: Justin Franks from Woodbridge, NJ United States  
I would have bought this RDA to replace my old TOBH v2.5 RDA if it weren't for one thing: the positive (center) post hole being so much higher than the negative post holes.

I mount my coils with the upper lead in the negative post and the lower lead in the positive post. This helps give you a little bit more room to tuck the wick under on that side. I also have more luck wicking this way; it's easier to ensure that every millimeter of wire is in contact with the wick, even the coil legs.

However, if this isn't an issue for you, this should be a great RDA if you want something fairly compact and simple that performs great. It does not have massive amounts of airflow (it's no Mutation X) but it should be plenty to give good clouds while still having great flavor.

Very nicely done, JayBo Designs. I just wish this RDA would have worked for me, but it doesn't, so I had to look elsewhere for my TOBH replacement. I ended up with the Project Sub-Ohm CLT V3 Mini.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great Atty! August 14, 2015
Reviewer: Gilbert from Granada Hills, CA United States  
Easy to build. Good flavor with enough of air flow.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
soooooo good. August 9, 2015
Reviewer: Gerald Guyal from San Diego , CA United States  
This thing is great on flavor and can still cloud if you build it right. For the price it's hard to beat.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great RDA July 12, 2015
Reviewer: Brock Moran from Dover, OH United States  
Everything by Jaybo is a masterpiece, and this atty is no exception. Love the build deck, and aesthetic appeal as well. Great job.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
It's a flavor atty. July 8, 2015
Reviewer: Julio Guevara from LOS ANGELES, CA United States  
So if you are looking for a cloud chasing atty, then look elsewhere.  This indestructible is amazing the flavor is always on point, and this new center post as not spin on me even with 20g. But I will be drilling out some holes very soon.

Was this review helpful to you?

View All Customer Reviews