Innokin Coolfire Ultra 150W TC Box Mod
The Innokin Coolfire Ultra 150W TC Box Mod is the latest version of the Coolfire family and has been updated with a 150W capable AETHON chipset and a 4000mAh built-in battery. The Coolfire Ultra retains an ultra thin form factor measuring 22mm wide and tapering out to 24mm for the 510 connector. Powering the Coolfire Ultra is an AETHON chip with TC Dry Hit Prevention, Preboost Technology, and precise ohm reading. The Innokin Coolfire Ultra Box Mod is an affordable 150W device with a technologically advanced chipset and pocket friendly form factor.
Monthly Featured E-Juices
All Sub-Ohm Tanks
- Aetheon Chipset
- 6 to 150W Output
- 0.1 ohm Minimum Atomizer Resistance
- VDC Output with ClearWave Technology
- UltraFast Power Delivery
- 0.2 Seconds from Activation to Fire
- Precision Coil Resistance Reading
- .00000 Accuracy
- Uniform Coil Heating
- Ultra Low Standby Power Consumption
- Temperature Control Output
- Ni200 Nickel Support
- Stainless Steel Support
- Titanium Support
- Temperature Control PreBoost Feature
- Total TC Dry Hit Prevention and Quick Calibration Feature
- Built In 4000 mAh Battery
- Tremendous Battery Life for Form Factor
- Spring Loaded Gold Plated Brass 510
- Stainless Steel Thread Points
- Three Button Adjustment
- Wide Area Firing Button
- Tri LED Battery Life Feedback Indicator
- OLED Display
- Output Wattage
- Output Temperature
- Atomizer Resistance
- Battery Life Indicator
- 2A Micro USB Charging Port
- Passthrough Technology
- Integrated Charging Safety Protection
- One Innokin Coolfire Ultra 150W TC Box Mod
- One Micro USB Charging Cable
- One Silicone Sleeve
- One QuickStart Guide
- One User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.