Joyetech CuBox 50W 3000 mAh Starter Kit
Joyetech introduces their CuBox 50W 3000 mAh Starter Kit that features a 3000 mAh built in battery and utilizes the new Joyetech Cubis 2 sub-ohm tank. The CuBox 50W 3000 mAh device runs on direct voltage output of which the output to the atomizer is based on atomizer resistance and battery state. A five light LED at the top of the device indicates battery life at five different levels; five, four, three, two, and one light(s) respectively, with various percentage ranges each. The CuBox is operated by a single button, has 2A quick charging capability via micro USB port, and has venting slots at the base of the device. Joyetech introduces their new Cubis 2 sub-ohm tank with the CuBox which is unique in the sense that it offers a child resistant, flip top fill design that is capable of holding up to 3.5ml of E-Liquid. Two indication marks on the Cubis 2 must be aligned to flip open the top of the tank and make the two fill ports accessible. The Cubis 2 sub-ohm tank utilizes the ProC-BF coil system and comes with two 0.6 ohm coils that can be run from 15 to 28W. A proprietary 9mm drip tip and acrylic 510 drip tip adapter is included with the CuBox 50W 3000 mAh Starter Kit as well. Combining a small form factor that is comfortable to hold, with a 3000 mAh battery and the new Cubis 2 child resistant flip top fill sub-ohm tank, the CuBox 50W 3000 mAh Starter Kit is perfect for those who enjoy portable yet powerful devices!
Monthly Featured E-Liquids
CuBox Mod Features:
- Direct Voltage Output
- Output Based on Resistance and Battery State
- On and Off Capable
- 0.2 to 3.5 ohm Atomizer Resistance Range
- Built In 3000 mAh Battery
- LED Battery Light Indicator
- Five Light Indicators
- Five Lights, 90 to 100%
- Four Lights, 70 to 89%
- Three Lights, 30 to 69%
- Two Lights, 10 to 29%
- One Light, 1 to 9%
- Ergonomic Size and Shape
- Single Button Operation
- Micro USB Charging Port
- Venting Slots at Base of Device
- Zinc Alloy Chassis
- Stainless Steel 510 Threading
- Gold Plated Contact
- Overheat Protection/Overtime Firing/Low Voltage
Cubis 2 Sub-Ohm Tank Features:
- 22mm Diameter
- Child Resistant Flip Top Fill Design
- 3.5ml Capacity
- Dual 7mm by 3mm Fill Ports
- ProC-BF Coil System
- Single Top Airflow Control
- 9mm Propietary Drip Tip
- One Joyetech CuBox 50W 3000 mAh Box Mod
- One Joyetech Cubis 2 Sub-Ohm Tank
- One Acrylic 510 Drip Tip
- Two 0.6 ohm ProC-BF Coil Heads
- Spare Parts Pack
- User Manual
- Micro USB Charging Port
Due to the nature of this sale, all sales are final and no refunds or exchanges will be accepted. Store Credit may be permitted if item is defective on arrival.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Advanced User Item. Use AT YOUR OWN RISK!
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.