Joyetech Unimax 22 Starter Kit
The Joyetech Unimax 22 Starter Kit represents the compact edition of the newest generation pen style systems from Joyetech, following up on the critically acclaimed Unimax 25 by retaining the performance and coil system in a smaller, more portable edition. Following in suit with the Unimax 25, the Unimax 22 features the two tone, replaceable sticker chassis aesthetic that creates a striking and visually pleasing design. The 22mm diameter Unimax 22 battery is powered by a 2200 mAh integrated battery, with a working range of 3.3V to 4.2V between 0.15 to 3.5 ohms. The Unimax 22 can be switched between two modes, with a standard Direct Output Mode that is dependent on current battery state and a more controlled Constant Voltage Mode that outputs a constant and consistent 3.7V. Accompanying the Unimax 22 Battery is the Unimax 22 Sub-Ohm Tank, a trimmed down version of the Unimax 25 Sub-Ohm Tank. The Unimax 22 Sub-Ohm Tank features Joyetech's TFTA system, referring to the Top Fill (TF) and Top Airflow (TA) design of the chassis. The Top Airflow features dual 15mm by 1.5mm airslots located at the top of the chassis, with the ability to be adjusted as needed. The Unimax 22 Sub-Ohm Tank utilizes a coil structure designed off of the Cubis BF platform, including two BFL Kanthal 0.5 ohm coils that are optimized for use between 20 to 40W, pairing with the working range of the Unimax 22 Battery. Sharing the same platform that has received great positive reviews, Joyetech's Unimax 22 Starter Kit is the perfect alternative for users looking for the performance of the Unimax 25 in a smaller more
Purchase Additional Unimax Coils Here!
Unimax 22 Battery Features:
- 2200 mAh Integrated Battery
- 3.3V to 4.2V Output
- 0.15 to 3.5 ohm Atomizer Resistance Range
- Micro USB Charge Port
- 5V 1A Maximum Charging Port
- Intelligent Battery Life Indicator
- 50W Maximum Output Capacity
- Dual Working Modes
- Direct Output Mode
- Output Relative to Current Battery State
- 4.2V on Full Charge
- Constant Voltage Mode
- Full Stainless Steel Construction
- Changeable Leather Accents
- Stainless Steel 510 Thread Point
- 24K Gold Plated Spring Loaded Connection
- Single Button Operation
- Dual Circuit Protection
- Over Charge/Over Current/Over Discharge
Unimax 22 Sub-Ohm Tank Features:
- 22mm Diameter
- TFTA Design
- Top Filling (TF)
- Top Airflow (TA)
- Dual Adjustable Top Airflow
- 15mm by 1.5mm Each Airslot
- 2.0ml Max Capacity
- BFL Kanthal 0.5 ohm DL Coil
- Specifically Designed for Direct Lung Inhales
- Kanthal and Organic Cotton
- 20 to 40W
- Compatible with BF Series Atomizers with Adapter
- Adapter Sold Separately
- Not Compatible with BF RBA
- 10mm Delrin Drip Tip
- Accepts Standard 510 Drip Tips
- Stainless Steel and Glass Construction
- One Joyetech Unimax 22 2200 mAh Battery
- One Joyetech Unimax 22 Sub-Ohm Tank
- Two BFL Kanthal 0.5 ohm Coils
- One Micro USB Cable
- Spare Glass Tank Section
- Spare Parts
- User Manuals, Warranty, and Warning Cards
Due to the nature
of this sale, all sales are final and no refunds or exchanges will be
accepted. Store Credit may be permitted if item is defective on arrival.
Note: Batteries must be matched in brand, model and battery state at
all times. Discharge and recharge batteries within the same grouping of
two. Failure to do so may result in injury. Never use damaged or
improperly wrapped batteries with this device.
Advanced User Item. Use AT YOUR OWN RISK!
Never use a short or flat 510 connection on any hybrid or hybrid style
device. If unsure whether this pertains to your particular set-up, DO
NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.