KangerTech Aite 24mm RDTA
Due to the nature of manufacturing and design, each KangerTech Aite 24mm RDTA features a unique drip tip colorway and patterning. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random.
The KangerTech Aite 24mm RDTA is a dual post, single coil atomizer with 2ml tank capacity and an open to fill port that allows for easy refilling. The dual post build deck has an individual terminal each that is 4mm tall and 3mm wide, with flathead screws securing coils. The 2ml tank can be accessed by pushing the RDTA at the indicated area, then flipping the top cap open, to reveal the deck and the fill port. The Aite also has adjustable single side airflow, with three 3mm air ports. This RDTA has a gold plated 510 contact pin and a 9mm wide bore drip tip. The Aite comes with five prebuilt Clapton coils and a small pack of Japanese cotton. The KangerTech Aite is a good budget RDTA for those looking to try RDTAs.
Monthly Featured E-Liquids
- 24mm Diameter
- Dual Post, Single Terminal Style Build Deck
- Dual Terminals
- 4mm by 3mm Per Terminals
- Coils Held Down by Flathead Screws
- PEEK Insulator
- 2ml Capacity Tank
- Angled Top Airflow Design
- Three 3mm Air Ports
- Fully Closeable
- Fully Adjustable
- Flip to Open Fill Port
- Remove Top Cap, then Push and Flip Air Flow Ring
- 6mm by 3mm Fill Port
- Gold Plated 510 Contact Pin
- 810 Drip Tip
- One AITE RDTA Tank
- Five Clapton Coils
- One Screw Driver
- Two Screws
- One Japanese Cotton
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.