Lost Vape Therion DNA 75C Bottom Feed Box Mod
To avoid battery damage, remove atomizer prior to removing or installing battery.
Lost Vape comes in with their new Therion DNA 75C Bottom Feed Box Mod, the very first Therion series device that is equipped with the newest Evolv DNA 75C Color chipset, built in Escribe software and a silicon squonk bottle. It features much of the same aesthetics as the first Therion; curved chassis, carbon fiber or wood accent panels, leather wrapped battery door, 75W maximum output, temperature control suite, a single 18650 platform allowing for a high amperage 18650 batteries (sold separately) ran parallel and a fresh take on bottom feeding devices by introducing a 7ml silicon style squonk bottles that rests comfortably behind the battery. The squonk bottle can be easily refilled by taking off the atomizer and replacing it with the 30ml refill. The refill bottle and squonk bottle utilizes an air release valve for a quick and smooth refill. The control face features the modern Lost Vape design, with an oversized firing button and three adjustment buttons. The Therion 75C is equipped with Evolv's newest Evolv DNA 75C Color chipset and has a 0.96 inch Full Color TFT Screen which displays essential data in a new and improved way. The 510 connection is machined out of high grade stainless steel while the base chassis is milled out of zinc alloy, while the nickel plated brass 510 connection ensures high level conductivity. With its new full color TFT screen combined with built in Escribe software, and their brand new silicon bottles, the Lost Vape Therion DNA 75C Bottom Feed Box Mod is a great choice for many vapers.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Shop All Sub-Ohm Tanks
Shop All Batteries
Monthly Featured E-Liquids
- DNA 75 Chipset
- Official Evolv DNA 75C Color Chipset
- 1 to 75W Output
- 30A Maximum Continuous Output
- Built In Escribe Software
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- 200 to 600 Degrees Fahrenheit
- Squonk Ready Stainless-Steel 510 Connection
- Single 18650 Platform
- Gold Plated Spring Loaded Contacts
- Batteries Sold Separately
- 7ml Silicon Refilling Bottle Rests Behind Battery
- Easily Refillable with a Threaded 30ml Refilling Squeeze Bottle
- Silver Chassis has Ebony Wood Accent Panels
- Black Chassis has Carbon Fiber Accent Panels
- Leather Wrapped Battery Bay
- Four Button Control Face
- Oversized Firing Button
- Rectangular Adjustment Buttons
- 0.96 Inch Full Color TFT Screen
- Displays Essential Data Neatly
- Check Atomizer
- Weak Battery
- Check Battery
- Temperature Protected
- Ohms Too High/ Too Low
- Too Hot
- Adjustable via Escribe
- Escribe Companion Software
- Micro USB Port
- 1A Charging
- Firmware and Software Upgrade
- Stainless Steel 510 Thread Point
- Nickel Plated Brass 510 Contact
- One Therion DNA 75C Bottom Feed Box Mod
- One 7ml Silicon Squonk Bottle
- One 30ml Silicon Refilling Bottle
- User Manual
- Warranty Registration Card
- Micro USB Cable
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.