Modefined Draco 200W TC Box Mod
Modefined presents the Draco Box Mod, a mod capable of 200W maximum output, full Temperature Control Suite, and a two inch full color screen. The Draco features a power output of 5 to 200 watts with three different power output settings. Standard give the user 100% power output, while Power gives 133%, and Power+ uses 150% power output. The Draco also has a Temperature Control Suite with Nickel, Titanium, TCR, M1-4, and Bypass Modes. The Temperature Control allows the output of 212 to 600 degrees Fahrenheit. The Draco has a four button design that allows the user to navigate the menu on its 2 inch full color screen. The main device screen shows power output and mode, voltage indicator, resistance reading, puff counter, dual battery indicator, and a real time standby clock. The user interface is presented in a vertical arrangement, allowing the user to navigate and select power output, temperature output, theme and color selection, and more. The Draco also has four unique screens for overtime, short circuit, low battery, overheating, and atomizer check warnings. The mod can be charged and updated through its USB port. The Draco also has a flip-open battery sled that allows access to two 18650 batteries (batteries sold separately). The top of the Draco Box Mod has a stainless steel 510 atomizer connection with a spring loaded, nickel plated brass center pin. The chassis of the Draco is built with a zinc alloy, while the sides are made of a G10 composite material. The Draco 200W TC Box Mod is a great device for users looking for an affordable, capable, and competitive device with classy and slightly rugged look.
Shop All Batteries
Monthly Featured E-Liquids
Shop All Sub-Ohm Tanks
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Modefined Draco Features:
- 5W to 200W Power Output
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS316 Support
- Bypass Support
- 212 to 600 degrees Fahrenheit Output Range
- 2 inch full color screen
- Output Wattage
- Output Temperature
- Atomizer Resistance
- Material and Mode Selection
- Output Current
- Curve Output
- Dual Battery Life Indicator
- Real Time Standby Clock
- Puff Counter
- Auto Locked and Sleep Time
- Theme Selection
- Wallpaper Adjustment
- Color Selection
- Brightness Adjustment
- Four Button Control Interface
- Over-sized Side Firing Button
- Dual Adjustment Buttons
- Menu Button
- USB Port
- Charging and Software Update
- Flip-Open Battery Sled
- Accepts Dual High Amperage 18650 Batteries
- Batteries Sold Separately
- Stainless Steel 510 atomizer connection
- Spring Loaded Nickel Plated Brass Center Pin
- Zinc Alloy and G10 Construction
- Upgradable Firmware Setting
- Overtime Protection/Adjustable from 5 to 15 Seconds/Short Circuit Warning/Low Battery Warning/Overheating Warning/Check Atomizer Warning
Modefined Draco Dimensions:
92.8mm by 50mm by 29.4mm
- One Modefined Draco 200W Device
- One USB Device
- One Draco User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.