Nitecore SC2 Superb 3A Battery Quick Charger - Two Bay
Nitecore's SC2 Superb 3A Battery Quick Charger is a two bay intellicharger capable of charging up to 3A on a single bay or up to 2A on two bays. The SC2 is suitable for charging IMR, Li-ion, LiFeP04, Ni-MH, and Ni-Cd batteries in sizes ranging from AAA to D and 18350 to 26650. Each bay is individually controlled by independent chips and uses spring loaded contacts for battery size adjustments. The charger housing is made from a fire preventative polycarbonate material and the charger has built in protection to ensure safe use. The Nitecore SC2 Superb 3A Charger is the fastest Quick Charger built for optimally charging IMR cells.
- 2 Bay Battery Charger
- Each Bay is Individually Controlled by Independent Chips
- Auto Current Selection
- Based on Battery Capacity
- Compatible with Lithium Ion/LiFePO4/Ni-Mh/Ni-Mh Batteries
- Optimized for IMR Batteries
- Maximum Charging Rates
- 2.0A Two Bay Use
- 3.0A Single Bay Use
- Battery Identification
- Four LEDs Go Up for Lithium
- Two LEDs Go Up for Ni-MH
- Four LEDs Flash for Error
- Non-Rechargeable Battery Inserted
- Batteries Short Circuited
- Batteries Inserted Backwards
- Simple LED Display
- Current Indicator
- Voltage Indicator
- Lithium Battery Recovery
- Able to Recover Low Voltage Batteries
- Over Charge/Over Time/Short Circuit/Reverse Polarity Protection
- Fire Preventative Polycarbonate Housing
- One Nitecore SC2 Superb 3A Charger - Two Bay
- Power Cord
- Warranty Card
Please Note: Batteries must be inserted with negative polarity towards the spring loaded end. DO NOT, under any circumstance, attempt to insert non-rechargeable and/or damaged batteries. Always use this and any charger under careful supervision.
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.