OBS Engine II Dual Coil 24mm RTA
Due to the nature of manufacturing and design, each OBS Engine II Dual Coil 24mm RTA features a unique driptip colorway and patterning. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random.
OBS presents the Engine II 24mm RTA with a dual post, dual terminal style build deck, quad adjustable air slots, and a 5ml juice capacity. Each post has two stainless steel side mounted screws with 2mm by 3mm of space for each lead. The cotton is then wicked through four juice ports at the bottom of the build deck. The Engine II has 5ml juice capacity and can be filled through a fill port hidden with a ring above the tank. This tank has four 8mm by 2mm air ports located below the drip tip that can be fully sealed. The Engine II has 510 thread, 304 Stainless stainless steel construction and a 810 resin drip tip.
Monthly Featured E-Liquids
Crius RDTA Features:
- 24mm Diameter
- Dual Post, Dual Terminal Style Build Deck
- 2mm by 3mm per Terminal
- Stainless Steel Deck and Screws
- 5ml Capacity Reservoir
- Ring Sealed Side Fill Port
- Quad Adjustable Air Slots
- 8mm by 2mm
- Adjustable via Top Cap
- Rounded Internal Top Cap
- 24K Gold Plated 510 Contact
- 304 Stainless Steel
- 810 Resin Drip Tip
- One OBS Engine II RTA
- Two Pre-Built Coils
- One Screwdriver
- One Spare Glass Tank
- One Cotton Pad
- One User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.