OFRF nexMESH Replacement Coils

Please Select Style and Configuration from Drop Down Menu.

OFRF nexMESH Replacement Coils are made exclusively for the Wotofo x MrJustRight1 Profile 24mm BF RDA. The nexMesh Replacement Coils is made with a perforated Kanthal A1 material with 3 times the mesh density of the standard Wotofo Mesh Style Coils. The increased density and surface area of the nexMESH micro weave netting design increases the heating speed and uniformity, guaranteeing consistent quality performance throughout the life of the coil. The micro weave design of the nexMESH coils also reduce spitback and hot spots. The mesh style coil sheet measures at 16mm by 6.8mm with a resistance of 0.13ohm and performs best at 60 to 70W.

Please Note: The pictures per style showcase the style Itself and are not indicative of exact configurations.

Product Configurations:

nexMESH Style Coil
- Kanthal A1
- 0.13 ohm
- 16mm by 6.8mm
- 60 to 70W Recommended Range

Advanced User Item. Use at Your Own Risk!

For wholesale inquiries, please contact OFRF at their official site at OFRF.com.

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.