Project Sub-Ohm® Edition VMA Mods Jester Stabilized Wood DNA 167 Box Mod
Made in the USA
Due to the nature of the manufacturing and design, each Project Sub-Ohm® Edition VMA Mods Jester Stabilized Wood DNA 167 Box Mod features a unique colorway and patterning. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random.
VMA with the collaboration of Project Sub-Ohm® enters the vaping scene with their newest device, the limited edition Project Sub-Ohm® Jester Stabilized Wood DNA 167 Box Mod, a 167W capable device with Evolv's DNA 167 chipset, full temperature control suite, a power effeciency of 97%, and is Escribe compatible. The PSO version of the Jester Stabilized Wood Box Mod features the Project Sub-Ohm® logo on the front of the device and each individual devices are unique to their own colorway and pattern. The Jester box mod is powered by dual 18650 batteries (sold separately), with a CNC machined hinged and locking battery door access, and solid brass contact plates to ensure a high level of conductivity. A three button control face with a oversized firing button is used to control the device and features a 0.96 inch OLED screen that displays essential data to the user. The limited Project Sub-Ohm® Jester Stabilized Wood DNA 167 by VMA is truly a must have device for enthusiasts. Proudly made in San Diego, California.
Shop All Sub-Ohm Tanks
Shop All Batteries
Monthly Featured E-Liquids
Please Note: Batteries must be matched in brand, model, and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- DNA 167 Chipset
- Official Evolv Chipset
- 1 to 167W Output
- Escribe Compatible
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- Additional Settings Configured Through Escribe
- 200 to 600 Degrees Fahrenheit
- Stabilized Wood Housing
- Single Piece SS 510 Top Plate
- SS Face Plate
- CNC Machined Hinged and Locking Battery Access Door
- Accepts Two 18650 Batteries In Series
- Solid Brass Contact Plate
- Three Button Control Face
- Oversized Firing Button
- Adjustment Buttons
- 0.91 Inch OLED Display Screen
- Displays Essential Data Neatly
- Adjustable via Escribe
- Escribe Companion Software
- Micro USB Port
- 1A Charging
- Firmware and Software Upgrade
- Stainless Steel 510 Thread Point
- Spring Loaded 510 Contact
DNA 167 Features:
- 1 to 167W Output Range
- 1 to 7.4V Output
- 0.1 to 2.0 ohm Kanthal Resistance Range
- 0.08 to 1.0 ohm Temperature Sensing Range
- Temperature Range
- 200 to 600 Degrees Fahrenheit
- Cell by Cell Monitoring
- Cell Balancer
- Atomizer, Weak Battery, Temperature, Resistance, Auto Power Down, and Heat Protection
- Autosensing Temperature Resistance
- Lock Mode
- Stealth Mode
- Power Lock Mode
- Power Preset Mode
- Resistance Lock
- Max Temperature Adjustment
- Screen On Current
- Quiescent Current
- Power Down Current
- One Project Sub-Ohm® Edition VMA Mods Jester Box Mod
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.