Home > Rebuildables >

Project Sub-Ohm™ Plume Veil RDA V1.5 Rebuildable Atomizer by Aethertech (Innovation Redefined)

Project Sub-Ohm Plume Veil RDA by Aethertech

Images are for illustration purposes only. Actual color, finish and packaging may vary.

Our Price: $124.99

This item excludes from certain discount offers.

Stock Status: (Out of Stock)

Product Code: PV0009

Save on Flavor of the Week

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when purchased together

Coil Master Spinner 1 - SS [Add $8.99]

Avatar VapeNut Vapor Eliminator [Add $109.99]

Chubby Gorilla E-Liquid Bottle (30ml) [Add $1.49]

Coil Master 521 Tab Mini Ohm Meter [Add $18.99]

GeekVape Essential Tool Kit [Add $7.99]

Coil Master Ceramic Tweezer [Add $8.99]

ONE OF THE MOST INNOVATIVE RDA IS NOW AVAILABLE! Introducing The Premium RDA "The Plume Veil Project Sub-Ohm™ Edition"

Made In USA (
Project Sub-Ohm™ X Aethertech)

100% USA Made With 100% USA Materials

Improvements Over Plume Veil V1.2:
  • Entire Deck including center and negative posts are all 24K Gold Plated For Maximum Conductivity!
  • Top Airflow holes are increased from 2 to 5 holes for unbelievable air delivery!
  • Juice well is much deeper than V1.2 to hold more cotton and more juice!
  • For Project Sub-Ohm™ Edition Plume Veil RDA V1.5 are serialized to give you that personal touch and increase value!
  • Ultra Limited!

Product Features:
  • Project Sub-Ohm™ Logo is beautifully engraved on one side and Aethertech logo is engraved on the other side of the atomizer
  • Unique design with three separate sources for airflows. 1. Air slots in front of coil, with AFC. 2. Air holes through negative posts to bring air to back side of coil. 3. Air holes on top of cap to create a vacuum effect
  • Uni-deck design where the negative posts are milled into the deck
  • For Plume Veil RDA V1.5, entire deck including center and negative posts are all 24K Gold Plated for Maximum Conductivity!
  • Delrin insulator at drip tip (Also serves as AFC for top air holes)
  • Rotating "T" center post to accommodate a multitude of different builds
  • Post holes large enough to accommodate 4 strands of 22 gauge. So twisted builds will be no problem
  • PEEK insulators with a melting points of 650 degree Fahrenheit
  • 22mm in diameter so Plume Veil will fit most mod on the market flush
  • Ultra Limited Quantities!
Based on the features above, this atomizer is highly sought after, well designed and born to be a very unique piece.

***Please be sure to clean your atomizer before use

Advanced User Item. Use at Your Own Risk!

NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse of mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous

VaporDNA™ and Project Sub-Ohm™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

Project Sub-Ohm™ is a sub-division of VaporDNA™.
All pictures are based on practicality, copyright reserved.

Average Rating: 4.5 of 5 Total Reviews: 22 Write a review »

  1 of 1 people found the following review helpful:
Macheining Brilliance January 16, 2015
Reviewer: Mathew Ludwig from Edmonton, AB Canada  
Ive had this since it was realeased. I use it everyday. I still haven't had to change the O-rings. This is because of how perfectly cut these pieces were. Around the edges where the caps seal over the O-rings exist's almost microscopic bevels which hug the oring. The increased airflow from the top 5 ports are what really put this RDA over the top. Just ads a different dimention to the pull. And the Gold plating, wow. Hard stuff. Ive used stainless rods and have pryed my coils around in there just to get them to fit in, not one scratch in the gold plating. Im debating taking out an insurance policy on this baby. Worth way over the 125. Ill never buy another RDA again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Black akuma December 12, 2014
Reviewer: Michael Swetell from Alpharetta, GA United States  
This was such a wonderful expired XD working with these guys.great customer support, and just an all around good experience; not to mention the great prices too.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
huge clouds and taste, poor threads December 10, 2014
Reviewer: Rockster 68 from Germany  
It´s like Rip already showed in his video. I had a hard time to shut down the top air control and an even worse to open it. Beside that, I´m running it in single coil mode with 24 gauge g-plat wire standard coil, no micro. 0.3 ohms and japanese cotton, 95 % VG juice, the clouds with a fully charged Sony Konion VTC4 are phenomenal and the taste is awsome. Even considering the bad threads I think this one can be recommended to any experienced vapor who´s looking for a good RDA.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
5 stars ! December 4, 2014
Reviewer: Sebastian Fagadar from Astoria, NY United States  
I liked shopping on your/this website. I will most likely shop here again !

Was this review helpful to you?

  3 of 4 people found the following review helpful:
Terrible machining/quality control November 26, 2014
Reviewer: xDarktime  
I was super stoked to purchase this little guy, but ended up being pretty disappointed. First, the delrin top piece was totally stuck to the top cap. Second, the "AFC walls" on the bottom of the top cap were razor sharp. While cleaning the device, which was necessary because it came with metal shavings and what not, I cut my finger and started bleeding. After reading more into Aethertech, I'm convinced they're not that great of a company. This product revealed that.

VaporDNA, however, were really great and offered me a full refund. I opted to get a Hobo and Plume Veil clone afterwards and am confident I'll have a better experience with those products. It's a shame because I've heard such cool things about the Plume Veil. Nonetheless, for over a hundred bucks, this thing fell far short of my reasonable expectations.

Was this review helpful to you?

View All Customer Reviews