SMOK R200 200W TC Compact Box Mod
The SMOK R200 200W TC Starter Kit is a great way to experience all the benefits of advanced Temperature Control. The SMOK R200 200W TC is capable of up to 200W of power from the dual high amperage 18650 batteries (sold separately) and includes improved Temperature Control features like Adjustable Initial Resistance and Adjustable Temperature Coefficient Resistance (TCR). The SMOK R200 200W TC features a Spring Loaded Center Pin, Micro USB Port (charging and firmware updates), two line OLED Display, smooth clickable buttons, and a shiny new paint finish with a soft feel. Onboard chipset features for the SMOK R200 Vape Mod include Intelligent Atomizer Recognition, Puff Monitoring, Short Circuit / Overheating Protection, 12 Second Cutoff and Low Battery Warning.
R200 200W TC Features:
- 1 to 200W Power Output
- 0.10 to 3.0 ohm Atomizer Resistance Range
- Temperature Control Output
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- Adjustable Initial Resistance
- 200 to 600 degree Fahrenheit Output Range
- 0.06 to 2.0 ohm Atomizer Resistance Range
- OLED Screen
- Output Wattage or Temperature
- Output Voltage
- Mode and Heating Element
- Battery Life Indicator
- Atomizer Resistance
- Amperage Output
- Innovative and Ergonomic Three Button Control Interface
- Oversized Power Button
- Ergonomic Adjustment Buttons
- Reset Button Located Between Adjustment Buttons
- Slide to Open Bottom Door
- Stainless 510 Threading
- Overheat Protection/Puff Monitoring/Overheat Protection/Short-Circuit Protection/Low Battery Warning
- One R200 TC Box Mod
- One USB Charging Cable
- User Manual
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.