SMOK TFV12 Prince Replacement Coil Pack
The SMOK TFV12 Prince Replacement Coil Pack are high performance replacement coils for the TFV12 Prince Sub-Ohm Tank and continues the classic TFV8 series coil design and function. The TFV12 Prince Replacement Coils come in three types: V12 Prince-T10 coils that are 0.12 ohm decuple coils rated for 60 to 120W, V12 Prince-Q4 coils that are 0.4 ohm quadruple coils rated for 40 to 100W, V12 Prince-X6 coils that are 0.15 ohm sextuple coils rated for 50 to 120W, and V12 Prince-M4 coils that are 0.17 ohm quadruple coils rated for 30 to 70W. The V12 Prince RBA Head is one of the most capable in it's class, with an 17mm diameter deck that integrates a two post, dual terminal design with each terminal measuring 2mm in diameter. Ample airflow feeds into the V12 Princ RBA, with dual 8mm by 5mm internal airslots while wicking is efficient due to the unified wick port designs.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling
- SMOK V12 Prince Coil Family
- V12 Prince-T10 Decuple Coil Head
- 0.12 ohm
- Patented Decuple Coil
- 60 to 120W
- 80 to 110W Recommended Range
- V12 Prince-Q4 Quadruple Coil Head
- 0.4 ohm
- Patented Quadruple Coil
- 40 to 100W
- 60 to 80W Recommended Range
- V12 Prince-X6 Sextuple Coil Head
- 0.15 ohm
- Patented Sextuple Coil
- 50 to 120W
- 80 to 100W Recommended Range
- V12 Prince-M4 Quadruple Coil Head
- 0.17 ohm
- Patented Quadruple Coil
- 30 to 70W
- 45 to 55W Recommended Range
- V12 Prince RBA Head
- 17mm Deck
- Two Post Build Deck
- Dual Terminal Per Post
- 2mm Diameter Terminals
- Dual 8mm by 5mm Internal Airslots
- Unified Wicking Ports
- Preinstalled Dual 0.25 Clapton Coils
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.