Home > Rebuildables >

SXK RDA Rebuildable Atomizer by SXK Tech

SXK RDA Rebuildable Atomizer by SXK Tech

Images are for illustration purposes only. Actual color, finish and packaging may vary.

List Price: $34.99
Our Price: $29.99
Savings: $5.00

Stock Status: In Stock

Product Code: SXK001

Save on Flavor of the Week

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when purchased together

Avatar VapeNut Vapor Eliminator [Add $109.99]

Chubby Gorilla E-Liquid Bottle (30ml) [Add $1.49]

Coil Master 521 Tab Mini Ohm Meter [Add $18.99]

GeekVape Essential Tool Kit [Add $7.99]

Coil Master Ceramic Tweezer [Add $8.99]

Introducing the SXK RDA by SXK Tech! A original and affordable design for innovative flavor chasing!

Original Designed and Manufactured by SXK Tech

SXK RDA is an very unique RDA which target strictly to flavor chasers! Even thought this RDA can blow some decent cloud, the most unique feature lays within it's top cap. The top cap is actually solid from the bottom, the vapor travels from the side of the top cap to your drip tip. This unique design allows vapor to condense and become very flavorful. The drip tip is the airflow controller to adjust the tightness of the draw. This is one of the most uniquely designed RDA oft this year! You got to try it to believe it!

Product Features:
  • Origin design by SXK Tech
  • Comes with drip tip with adjustable airflow (turn left to close, turn right to open)
  • Sleek air inlet (front: 2x2mm, back: 2x2mm) to product amazing flavor and looks very sleek!
  • With an innovative top cap design where air travels from the side to the drip tip, to avoid spit back and increase flavor production
  • Deep juice well
  • 22mm outside diameter
  • 304 Stainless Steel
  • Quad post design with split center post for ease of build
  • 2 solid negative poles that are milled to the deck for maximum conductivity
  • 2 positive poles with peek insulator at the bottom
  • Post holes are 2mm
  • Copper 510 connection pin for maximum conductivity
  • Original and Affordable
  • Innovative Flavor Chasing RDA
  • One of the most unique designs we have seen to date!

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.

Advanced User Item. Use At Your Own Risk!

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.

Average Rating: 4 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
Decent August 15, 2015
Reviewer: Bill You from Bloomington, MN United States  
Easy to build, ok to use. I still haven't found the right build to make this atomizer shine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Can't recommend June 30, 2015
Reviewer: Tina from Indianapolis, IN United States  
Top cap is a nightmare to get seated correctly, and it can only seat one way. I've resorted to pulling the whole body off the deck when dripping. I can't even tell you how many times I've sliced my fingers on the razor-sharp edges of the top cap, etc. Grub screws are smaller than you could possibly imagine. Airflow is on the tight side, even when all the way open, even for a mouth-to-lunger. The good things I can say about this rda: It simply does not leak. Very sturdy. Decent flavor.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Good for flavor, I guess April 18, 2015
Reviewer: MrUnSocial from Avondale, AZ United States  
Tiny chamber, very restricted airflow, nearly microscopic screws. Not for me, at all. I think it's a neat design; flavor is OK and vapor production is poor. Build it to get vapor production up and it gets insanely hot.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Good for flavor April 14, 2015
Reviewer: Rolf Katholnigg from Roswell, GA United States  
This RDA is designed for flavor. The airflow is for mouth to lung only. For me personally, it could use a lot more airflow. Otherwise, it is a good quality RDA, and due to the design of the airflow pretty much leak proof.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Small build deck, big flavor. December 20, 2014
Reviewer: Steven Hewitt from Jourdanton, TX United States  
This is a flavor atty.  The airflow comes through an engineered gap between the topcap and the barrel.  Air flows down the barrel and right onto the coils.  The barrel fits on the build deck in such a way that I challenge you to make this thing leak.  Airflow is regulated by the 454 Big Block T-shaped drip tip, and is generous.  Wire held secure in posts with TINY grub screws, allen wrench provided.  The build deck is only @ 14.5mm, which makes big coils from lower gauge wire a problem.  I built with 8 wraps of 26 gauge around a 2.5mm mandrel, and the atty just purred.  Great flavor, great atty.  Reordered another already.

Was this review helpful to you?