Sigelei Fuchai 213 Plus TC Box Mod
The Sigelei Fuchai 213 Plus TC Box Mod is the newest edition of the Fuchai 213, extending output range to 223W while integrating a new vibrant RGB display that intuitively colors specific zones for easier readout and visibility. Maintaining the sleek, vertical based chassis of the original Fuchai 213, the 213 Plus is manufactured out of a combination of Zinc and Aluminum Alloys, presenting a lightweight base chassis reinforced with heavier zinc alloy. The 213 Plus features an expanded output range of 10 to 223W, with a 0.1 to 3.0 ohm atomizer resistance range. Alongside standard power based output, the 213 Plus is also capable of extensive temperature controlled output that supports Nickel, Titanium, and multiple Stainless Steel materials. The 213W Plus also features the inclusion of both TCR (TCR Mode now calculated in Celsius) and TFR functionality with a 5 Coil Memory bank, greatly extending precision and customization. The inclusion of power preheat, in which a user set wattage and time dials output to ramp or decrease appropriately, and a temperature compensation mode that can compensate for fluctuations in temperature, combine to create one of the most sophisticated output capabilities available today on market. The 213 Plus integrates a new 0.96 inch TFT color screen that features an expanded three column, five row display matrix that provides an amount of essential data at a glance, from detailed battery state and battery life meters to output voltage, resistance, and wattage. Two adjustment buttons are positioned on top of the TFT screen making it ergonomically feasible to use and adjust the Fuchai 213 Plus with a single hand. With an expanded output and a greatly improved screen, Sigelei's Fuchai 213 Plus TC Box Mod is a rejuvenated flagship platform built to compete with the best that the current market has to offer.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 223W Maximum Output Wattage
- 10 to 223W
- 1.0 to 7.5V
- 0.1 to 3.0 ohm Atomizer Resistance Range
- 35A Maximum Output
- Preheat Power
- Set Output Wattage and Time
- Hugely Increases Vaping Capability and Precision
- Temperature Control
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- TCR Functionality
- Temperature Coefficient of Resistivity
- TFR Functionality
- Temperature Factor of Resistivity
- Resistance Read and Lock
- 5 Coil Memory Bank
- 200 to 570 Degrees Fahrenheit
- Sliding and Locking Bottom Battery Access Door
- Accepts Two 18650 Batteries (sold separately)
- Ergonomically Placed Controls
- One Handed Operation
- Adjustment Buttons Clustered Next to Firing Button
- RGB 0.96 TFT Display
- Expanded Five Row, Three Column Display
- Vibrant Display
- Atomizer Resistance
- Output Voltage
- Output Current
- Battery State and Battery Life Indicator
- Output Wattage
- Output Temperature
- Micro USB Charge and Update Port
- Trim and Striking Design
- Sharp Angular Control Face
- Curved Chassis
- Zinc Alloy Aluminum Alloy Chassis
- Stainless Steel 510 Connection
- Spring Loaded Gold Plated Connection
- High Input Voltage/Reverse Battery/Low Resistance/Battery Imbalance/Low Input Voltage/Short Circuit/Overheating Protection
- One Sigelei Fuchai 213 Plus Box Mod
- One Micro USB Charging and Update Cable
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.