Sigelei Fuchai R7 230W TC Box Mod
The Sigelei Fuchai R7 230W TC Box Mod is the newest edition to the Fuchai platform, with an output range of 230W and a strikingly beautiful chassis. Maintaining the sleek, vertical based chassis of the original Fuchai 213, the R7 is manufactured out of a combination of Zinc alloy and plastic, presenting a lightweight base chassis reinforced with heavier zinc alloy. The R7 features an expanded output range of 10 to 230W, with a 0.5 to 3.0 ohm atomizer resistance range. Alongside standard power based output, the R7 is also capable of extensive temperature controlled output that supports Nickel, Titanium, and multiple Stainless Steel materials. The R7 also features the inclusion of both TCR (TCR Mode now calculated in Celsius) and TFR functionality with a 5 Coil Memory bank, greatly extending precision and customization. The inclusion of power preheat, in which a user set wattage and time dials output to ramp or decrease appropriately, and a temperature compensation mode that can compensate for fluctuations in temperature, combine to create one of the most sophisticated output capabilities available today on market. The R7 integrates a 0.96 inch OLED color screen that features an expanded three column display matrix that provides an amount of essential data at a glance, from detailed battery state and battery life meters to output voltage, resistance, and wattage. Two adjustment buttons are positioned on top of the OLED screen making it economically feasible to use and adjust the R7 single handedly. The R7 is powered by dual high amperage 18650 (sold separately) batteries which are housed on the side of the through a battery access door. With an expanded output and a aggressive chassis, the Sigelei Fuchai R7 230W TC Box Mod is a rejuvenated flagship platform built to compete with the best that the current market has to offer.
Shop All Batteries
Monthly Featured Flavors
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 230W Maximum Output Wattage
- 10 to 230W
- 1.0 to 7.5V
- 0.5 to 3.0 ohm Atomizer Resistance Range
- 35A Maximum Output
- Preheat Power
- Set Output Wattage and Time
- Hugely Increases Vaping Capability and Precision
- Temperature Control
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- TCR Functionality
- Temperature Coefficient of Resistivity
- Resistance Read and Lock
- 5 Coil Memory Bank
- 200 to 570 Degrees Fahrenheit
- Side Battery Access Door
- Accepts Dual High Amperage 18650 Batteries (sold separately)
- Ergonomically Placed Controls
- One Handed Operation
- Adjustment Buttons Clustered Next to Firing Button
- 0.96" OLED Display
- Three Column Display
- Vibrant Display
- Atomizer Resistance
- Output Voltage
- Output Current
- Battery Life Indicator
- Output Wattage
- Output Temperature
- Micro USB Charge and Update Port
- Trim and Striking Design
- Sharp Angular Control Face
- Curved Chassis
- Zinc Alloy and Plastic Construction
- Stainless Steel 510 Connection
- Spring Loaded Gold Plated Connection
- High Input Voltage/Reverse Battery/Low Resistance/Battery Imbalance/Low Input Voltage/Short Circuit/Overheating Protection
- One Sigelei Fuchai R7 230W Mod
- One Micro USB Charging and Update Cable
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA® will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.