Sigelei J150 Plus 160W TC Box Mod
The Sigelei J150 Plus 160W TC Box Mod is the optimized version of the J150 and features upgrades such as a zinc alloy chassis, a slightly larger size and a maximum wattage of 160W. The Sigelei J150 Plus features TC, supporting use of Kanthal, Titanium, Ni 200 Nickel, and Stainless Steel heating elements. The inclusion of power preheat, in which the user sets wattage and time, dials output to ramp or decrease appropriately and a temperature compensation mode can compensate for fluctuations in temperature. The Sigelei J150 Plus is powered via bottom loaded dual 18650 batteries (sold separately) with a sliding and locking mechanism that clicks securely into place, allowing for quick and easy battery replacement. An on and off switch located on the side of the device allows for safe control of power and the firing and adjustment buttons above the OLED screen make it ergonomically feasible to use with just one hand. The OLED screen features a three column, three row display matrix that provides an essential amount of data at a glance; output voltage, resistance, wattage, and battery life. With its slim design and upgraded features, the Sigelei J150 Plus 160W TC Box Mod is a great choice for a box mod.
Shop All Batteries
Shop Sub-Ohm Tanks
Monthly Featured E-Liquids
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- 160W Maximum Output Wattage
- 10 to 160W
- 1.0 to 7.5V
- 0.1 to 3.0 ohm Atomizer Resistance Range
- 35A Maximum Output
- Preheat Power
- Set Output Wattage and Time
- Hugely Increases Vaping Capability and Precision
- Temperature Control
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- TCR Functionality
- Temperature Coefficient of Resistivity
- TFR Functionality
- Temperature Factor of Resistivity
- Resistance Read and Lock
- 5 Coil Memory Bank
- 200 to 570 Degrees Fahrenheit
- Sliding and Locking Bottom Battery Access Door
- Accepts Two 18650 Batteries (sold separately)
- Ergonomically Placed Controls
- One Hand Operation
- Adjustment Buttons Clustered Next to Firing Button
- On and Off Switch
- OLED Display
- Two Row, Three Column Display
- Atomizer Resistance
- Output Voltage
- Output Current
- Battery State and Battery Life Indicator
- Output Wattage
- Output Temperature
- Micro USB Charge and Update Port
- Trim and Striking Design
- Sharp Angular Control Face
- Curved Chassis
- Zinc Alloy Chassis
- Stainless Steel 510 Connection
- Spring Loaded Gold Plated Connection
- High Input Voltage/Reverse Battery/Low Resistance/Battery Imbalance/Low Input Voltage/Short Circuit/Overheating Protection
- One Sigelei J150 Plus 160W TC Box Mod
- One Silicone Sleeve
- One Micro USB Charging and Update Cable
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.