Twisted Messes TM24 Pro-Series 24mm BF RDA
Twisted Messes introduces the TM24 Pro-Series 24mm BF RDA, a atomizer that is capable of being utilized as a bottom fed dripping atomizer, featuring a dual post four terminal build deck, a ULTEM Chamber reducer for single coil builds, and measures at 24mm diameter. The TM24 Pro-Series 24 has a 6mm deep juice well with centralized juice splitter for even juice distribution. The dual post four terminal build deck measures at 2.5mm by 2mm per post with coils being held down by top mounted titanium philip flat-head hybrid screws. Airflow enters the TM24 Pro-Series RDA through dual air slots measuring at 11mm by 2mm, fully adjustable by the center ring of the TM24. The Top cap of the Black, Blue, and Gold finishes are PVD plated stainless steel while the stainless steel finish has a polished SS air flow control and drip-tip. The TM24 Pro-Series uses the popular 810 drip tip system and comes with an ULTEM wide bore drip tip, a Stainless Steel wide bore drip tip, a delrin wide bore drip tip, and a 510 drip tip adapter. The golden 510 pin can be changed to a squonk-ready pin for any bottom feeding device. The Twisted Messes TM24 Pro-Series 24 BF RDA was designed for maximizing flavor and vapor production in an easy to build design for anyone looking for a smooth and stylish rebuildable atomizer.
Monthly Featured E-Liquids
- 24mm Diameter
- Dual Post Four Terminal Build Deck
- 2.5mm by 2mm Per Terminal
- Top Mounted Titanium Philips Flat-head Hybrid Screws
- 6mm Deep Juice Well
- PVD Plated 304 Stainless Steel Deck and Posts
- Blue Finish
- Black Finish
- Gold Finish
- Full Polished Stainless Steel
- ULTEM Chamber Reducer for Single-coil Builds
- Threaded Top Cap
- Dual Airflow System
- 11mm by 2mm Each Airslot
- Fully Adjustable
- Gold Plated 510 Contact
- 304 Stainless Steel
- 810 Drip Tip
- 12mm Wide Bore 810 Stainless Steel Drip Tip
- 9mm Wide Bore 810 ULTEM Drip Tip
- 12mm Wide Bore Delrin Drip Tip
- 510 Drip Tip Adapter
- One Twisted Messes TM24 Pro-Series BF RDA
- One ULTEM 810 Drip Tip
- One Delrin 810 Drip Tip
- One Stainless Steel 810 Drip Tip
- One Hex Key
- One Hex Driver
- One 510 Drip Tip Adapter
- One Bottom Feed 510 Pin
- Spare Part Pack
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA® will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.