VGOD Trick Tank Pro R2 24mm RDTA
The VGOD Trick Tank Pro RDTA R2 is a 24mm RDTA that features a vertical two post design build deck with a bottom airflow system and a 4ml Tank capacity that can be filled from the side.The Trick Tank Pro RDTA features a wide build deck with stacked terminal two post design. Each posts have 3mm per terminal, the coils are secured in with side mounted flat head screws alongside centered redirected air channels that are 3mm by 2.5mm and a 4ml tank capacity. The Trick Tank Pro RDTA uses gold plated copper contact to provide amazing conductivity and response when fired. The VGOD Trick Tank Pro is the perfect RDTA designed to relinquish dripping and for anybody who chases flavor and clouds.
Monthly Featured E-Liquids
- 24mm Diameter
- 4ml Tank Capacity
- Side Fill Design
- 4mm Fill Port
- Two Post Stacked Terminal
- Dual Terminal Per Post
- 3mm Per Terminal
- Side Mounted Flathead Screws
- Direct Coil Airflow
- PEEK Insulator
- Centered Redirected Air Chnannels
- 2.5mm by 3mm each channel
- Quad Wicking Ports
- Redirected Bottom Airflow
- Two 10mm by 2.5mm Airslots Per Side
- 12mm Bore Threaded Drip Tip
- Stainless Steel Construction
- Gold Plated Copper Contact 510 Connection
- One Trick Tank Pro R2 RDTA
- One T-Tool
- Spare Parts Pack
- Two VGOD Pro Coils
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.