Vandy Vape GOVAD RDA
Vandy Vape's GOVAD RDA enters the market as the one of the most critically acclaimed platforms of 2017, presenting a tremendously versatile airflow system, a build friendly clamp post deck, and high quality machining and design. Measuring 24mm in diameter, the GOVAD RDA features a clean exterior design with high quality CNC engraving and softly sloped curves that create an appealing look. The GOVAD features a versatile, intuitive, and highly functional airflow system integrated in three locations while being adjustable and configurable between the three as needed. Dual bottom 7mm by 3.5mm airslots at the base of the chassis funnel into a single 3.5mm diameter raised airhole located centrally within the deck and is independently adjustable via the base AFC. Two sets of horizontal airflow work in tandem to create highly effective airflow, with each airslot measuring 5mm by 2.5mm each. Airslots are also milled into either side of each post, allowing users to set aggressive cross airflow in either orientation with ease. When set in full airflow mode, airflow coverage within the chamber is near unparalleled as compared ot other RDAs. Inside, the build deck features a spring loaded clamp style build deck that can is compatible with both single and dual coil configurations, synergizing with the innovative airflow systems to allow for high levels of performance and adjustability in either configuration. Additionally, the build deck's major components are 24K Gold Plated for increased conductivity while also offering an effective juice well depth of 5mm. The GOVAD RDA also adopts the new 810 Drip Tip standard for high performance atomizers, including a trio of delrin drip tips differing in height, width, and bore. Beautifully constructed, precision machined, and packing in the most intuitive and effective airflow systems across any atomizer today, Vandy Vape's GOVAD RDA enters the market as the premiere RDA of 2017 thus far.
- 24mm Diameter
- Two Post Clamp Style Build Deck
- Spring Loaded Coil Clamping System
- Intended for Single Coil Arrangements
- Spring Loaded Clamp Terminals
- Phillips Screw Secured
- Large Middle Space
- 9mm Distance
- Mount and Configure Coil Easily
- PEEK Insulator
- 5mm Deep Juice Well
- Gold Plated Terminals and Screws
- Four Airholes Milled Into Bottom of Posts
- 5mm by 2.5mm Each Airhole
- Redirected Center Airflow Channel
- Independently Adjustable Middle and Bottom Airflow
- Dual Bottom Airflow
- Quad Side Airflow
- Rounded Internal Top Cap
- 24K Gold Plated 510 Contact
- 304 Stainless Steel
- 810 Drip Tip
- 12mm Bore Delrin Drip Tip
- 12mm Bore Delrin Drip Tip
- 11mm Bore Delrin Drip Tip
- One Vandy Vape GOVAD RDA
- Drip Tip Set
- One Phillips Screwdriver
- One 510 Drip Tip Adapter
- Spare Part Pack
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
RiP Trippers Reviews Vandy Vape's GOVAD RDA!