Vapefly Galaxies MTL BF 22mm RDTA
The Vapefly Galaxies MTL BF 22mm RDTA is a curious creation featuring several design choices to ensure that the atomizer is always ready for use, such as a 2ml E-Liquid capacity, dual wicking ports, a spring loaded juice fill port, and a gold plated bottom fed design. The 22mm diameter build deck has two posts, with a single top mounted hex screw on each side. These terminals have a build height of 1.5mm and width of 2mm with a slight lip at the end to ensure that coil leads for and performance coil will sit directly on the terminal. This kit comes with two Ni80 26 guage pre-built coils and two strips of agleted cotton so the user can build right out of the box. There are two 3mm wicking ports that leads in to the 2ml juice tank. The Galaxies' build deck has a 3mm spring loaded juice fill port designed to fit most E-Liquid droppers and unicorn bottles. The bottom feed spout is centrally placed, along with two overflow ports in the central column of the atomizer, in order to take care of excess juice. The airflow of the Galaxies can be adjusted by removing two hex screws built into the terminal, directly drawing more air into the coils. The bottom of the build deck has two 2mm air slots that can be sealed by rotating the heat dissipating top cap, and aligning the matching air slots for easily adjustable mouth-to-lung use. There are 6 levels of airflow control, three of which are paired air holes for more air, and three single holes for a tighter draw. The top cap has a frilled heat dissipating design paired with a 5mm Wide 510 Delrin Drip Tip. Both the standard 510 pin and the 510 bottom feed pin are gold coated for maximum conductivity. The Vapefly Galaxies MTL BF 22mm RDTA is an excellent rebuildable atomizer successfully geared towards consistent and uninterrupted performance day in and day out.
Monthly Featured E-Liquids
- 22mm Diameter
- Two Post, Single Terminal Build Deck
- 1.5mm by 2mm Terminals
- Top Mounted Hex Screws
- Hex Screw Covered Airports
- Removable Hex Screws For Increased Airflow
- 3mm Dual Wicking Ports
- 3mm Spring Loaded Juice Fill Port
- PEEK Insulated Positive Post
- Centrally Located Bottom Feed Port
- Two 1mm Overflow Ports Above Squonk Pin
- Dual Adjustable 2mm Side Airslots
- Adjustable by Rotating Top Cap
- Heat Dissipating Top Cap Design
- 6 Levels of Airflow Control
- 3 Paired Air Holes for More Airflow
- 3 Single Air Holes for Tighter Airflow
- 5mm Wide 510 Delrin Drip Tip
- Gold Plated Standard 510 Pin
- Gold Plated Bottom Fed 510 Pin
- One Vapefly Galaxies MTL RDTA
- One Glass Replacement Tube
- One 510 Drip Tip
- One 510 Bottom Feed Contact Point
- One Spare Parts Pack
- One Screw Driver
- Two Ni80 1.0ohm Pre Built Coils
- Two Strips of Agleted Organic Cotton
- One Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.