Home > Devices > Starter Kits >

Wismec Active 80W Starter Kit
Wismec Active 80W Starter Kit


 
Images are for illustration purposes only. Actual color, finish and packaging may vary.


List Price: $109.99
Our Price: $69.99
Savings: $40.00

Stock Status: In Stock

Product Code: WACTIV

Choose Your Device Finish
Click to view another Choose Your Device Finish


Save on Flavor of the Week


Save on Batteries


Save on Chargers


Save on Wicks


Save on Wires


Save when purchased together

Coil Master 521 Mini V2 Ohm Meter [Add $18.99]

Coil Master DIY Kit Mini [Add $24.99]

HOMAN II DIY Vape Dock [Add $28.99]

KIZOKU Cell Atty Stand - Black [Add $3.99]

VPDAM V2 20ml Refill Bottle [Add $18.99]

Easy Fill Squonk Cap - 60ml - Silver [Add $7.99]

Qty:  
Description
 

Wismec Active 80W Starter Kit


Designed in the USA

Please select your product edition in the drop down menu. The Amor NSE Edition of this starter kit is only available in Red, Blue, Purple, and Green. The original NS Amor Edition is only available in Black, Orange, and Silver.

Wismec presents the Active 80W and Amor NS Starter Kit, a starter kit built for the outdoors with its 2100 mAh built-in battery, Bluetooth speaker capability, and excellent water resistance. The Wismec Active Box Mod has a 80W maximum output, 0.05 to 3.5 ohm atomizer resistance range and a 0.5 to 9V output range. The 2100 mAh can be charged at a maximum of 2A through a micro USB port. The port has a silicone seal that needs to be properly installed in order to complete the Active's waterproofing. The Wismec Active also has a full temperature control suite that is compatible with titanium, nickel, and stainless steel. The chip installed in the Active allows for 200 to 600 degrees Fahrenheit temperature range and has a 0.05 to 1.5 ohm atomizer resistance range. The 0.91 inch OLED screen displays output mode, output temperature, output power, output voltage, and atomizer resistance. The active has a 7 button control interface, three on the screen side for vaping use and four on the other side to control the Bluetooth speakers. The Wismec Active is able to continually play music through the speakers even when underwater. There is also a section of the Active to allow connection of a metal clip, allowing you to secure the device in more places than just your pocket.

The Wismec Active starter kit comes with either the Amor NS or Amor NSE sub-ohm tanks. The Amor NS tank is 27mm base diameter and 29mm bubble tank diameter; compatible with Wismec WS coil family, and has a 4.5ml e-liquid capacity. This starter kit comes with the WS01 triple 0.2 ohm head with a recommended 40 to 80W range and the WS04 MTL 1.3 ohm head with 7 to 13W range. The Amor NS has two 14mm outer ring slots with two 4mm slots and one 1mm hole, allowing for precise airflow control. With durability in mind, the 4.5ml juice tank and 9mm wide bore drip tip is made of colored acrylic.

The new Amor NSE Edition Wismec Active features a smaller sub-ohm tank with the familiar features of the original NS. The NSE comes with two new WS coil heads: The WS-M 0.27 ohm coil head has a wattage range of 30 to 60W, best used at 35 to 45W. The WS04 MTL 1.3 ohm coil head is specifically made for MTL use and has a wattage range of 8 to 14W. The Wismec Active Starter kit is an excellent device with two amazing options for users who love the outdoors or want a portable speaker at all times.


Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

Quick Links:
Shop All Batteries
Monthly Featured E-Liquids

Wismec Active Features:
  • Integrated 2100 mAh Battery
    • 1 to 80W Output Range
    • 0.05 to 3.5 ohm Atomizer Resistance
      • VW Mode
    • 0.5 to 9V Output Range
    • Firmware Upgradable
      • Reset Button Located By Micro USB Port
    • 2A Maximum Charging
      • Micro USB Update and Charging Port
  • Built-In Bluetooth Speaker
  • Full Temperature Control Suite
    • Titanium Support
    • Ni200 Nickel Support
    • Stainless Steel 316 Support
    • TCR Mode
      • Three Memory Modes
    • Atomizer Resistance Lock
    • 200 to 600 Degrees Farenheit
    • 0.05 to 1.5 ohm Atomizer Resistance
      • TC Mode
  • 0.91 Inch OLED Display Screen
    • Vertical Stack
    • Output Mode
    • Output Temperature
    • Output Power
    • Output Voltage
    • Output Current
    • Atomizer Resistance
  • Seven Button Control Interface
    • Oversized Firing Button
    • Two Adjustment Buttons
    • Play/Pause Button
    • Previous/Volume Down Button
    • Next/Volume Up Button
    • On/Off Button
  • Water Resistant
    • Requires Properly Sealed Silicone Cork
  • Gold Plated Spring Loaded Contacts
  • Metal Clip Hook
  • No Atomizer/Atomizer Low/Atomizer Short Circuit/Temperature Alert/10 Second Overdraw/Weak Battery/Low Power/USB and Battery Imbalance Protection/Reverse Polarity Protection

Product Dimensions:

  • 55.6mm by 26.6mm by 94.5mm

Amor NS Sub-Ohm Tank Features:
  • 27mm Base Diameter
    • 29mm Bubble Tube Diameter
  • Push to Open Sliding Top Fill System
    • Pour to Fill
    • 4.5ml Maximum Capacity
  • Wismec WS Coil Family
    • WS01
      • 0.2 ohm
      • Triple Coil
      • 40 to 80W
      • Organic Cotton
    • WS04
      • 1.3 ohm
      • Single NiCr Coil
      • 7 to 13W
      • Organic Cotton
  • Dual Bottom Airflow Control
    • 14mm Outer Ring Slot
    • Two 4mm Slots and One 1mm Hole
      • Per Side
    • Fully Closeable
  • 9mm Wide Bore Acrylic Drip Tip
  • Stainless Steel 510 Connection

Amor NSE Sub-Ohm Tank Differentiating Features:
  • 25mm Base Diameter
  • 2ml Standard Glass Capacity
    • 3ml Bubble Glass Capacity
  • Wismec WS Coil Family
    • WS-M 0.27 ohm Coil Head
      • Mesh Coil
      • 0.27 ohm
      • 30 to 60W Recommended Use
      • Best at 35 to 45W
    • WS04 MTL 1.3 ohm Coil Head
      • Ceramic Heating Material
      • 1.3 ohm
      • 8 to 14W Recommended Use

Standard Edition Includes:
  • One Wismec Active Box Mod
  • One Amor NS Sub-Ohm Tank
  • One WS01 Triple 0.2 ohm Coil Head
  • One WS04 MTL 1.3 ohm Coil Head
  • One Micro USB Cable
  • One Metal Hook
  • User Manual and Warning Card

Amor NSE Edition Includes:
  • One Wismec Active Box Mod
  • One Amor NSE Sub-Ohm Tank
  • One WS-M 0.27 ohm Coil Head
  • One WS04 MTL 1.3 ohm Coil Head
  • One Micro USB Cable
  • One Metal Hook
  • One Spare Parts Bag
  • Two User Manuals

Product Recommendations:

  • In order to use temperature control output, coils must be built using non-resistant wire.

Advanced User Item. Use at Your Own Risk!

NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.