Home > Devices > Starter Kits >

New!  Wismec Luxotic DF 200W Squonk Starter Kit
Wismec Luxotic DF 200W Squonk Starter Kit

Images are for illustration purposes only. Actual color, finish and packaging may vary.

List Price: $84.99
Our Price: $79.99
Savings: $5.00

Stock Status: In Stock

Product Code: WISLDF

Choose Your Device Finish
Click to view another Choose Your Device Finish

Save on Flavor of the Week

Save on Batteries

Save on Chargers

Save on Wicks

Save on Wires

Save when purchased together

Coil Master 521 Mini V2 Ohm Meter [Add $18.99]

Coil Master DIY Kit Mini [Add $24.99]

HOMAN II DIY Vape Dock [Add $28.99]

KIZOKU Cell Atty Stand - Black [Add $3.99]

VPDAM V2 20ml Refill Bottle [Add $18.99]

Easy Fill Squonk Cap - 60ml - Silver [Add $7.99]


Wismec Luxotic DF 200W Squonk Starter Kit

Designed in the USA

Wismec introduces the Luxotic DF 200W Squonk Starter Kit, an evolution of the third generation of Reuleaux mods that is features a familiar form factor paired with the Guillotine V2. The Luxotic DF device is capable of running up to 200W and has a full temperature control suite. A 1.3 inch OLED screen displays essential information to the user and a three button control face makes it easy to use. The Luxotic DF now features a slide and lock battery access door that accepts two high amperage 18650 batteries (sold separately) and has a maximum of 2A charging via a micro USB charge port. The Luxotic DF also has a removable back panel to easily access the 7ml squonk bottle. Included with the Luxotic DF 200W Starter Kit is Wismec's Guillotine V2 RDA, a 24mm diameter rebuildable atomizer with a matching 25.5mm beauty ring that comes squonk ready. It features a two post build deck with single 6mm by 2mm guillotine-style terminals per post. Each post has two top mounted hex screws to fully secure the guillotine clamps. This starter kit comes with two 0.28 ohm pre-built Clapton coils. Airflow enters the Guillotine RDA via dual adjustable tapered 10mm by 2mm side air slots that taper into two 3mm by 2mm per side. The Guillotine RDA has a 9mm deep juice well and a 10mm tall, 10mm bore Wide 810 ULTEM drip tip and a 17mm tall, 9mm bore wide 810 ULTEM drip tip. The Luxotic DF 200W Squonk Starter Kit is a welcome development to the Wismec brand and is sure to be a top contender among the competition today.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

Quick Links:
Shop All Batteries
Monthly Featured E-Liquids

Wismex Luxotic DF Features:
  • Dual 18650 Platform
    • 1 to 200W Output
    • Reverse Polarity Insert
    • Allows for Easy Exchange and Replacement
    • Firmware Upgradable
  • RX300 Chipset
    • Variable Wattage Mode
      • 1 to 200W Power Output
      • 0.1 to 3.5 ohms
    • Full Temperature Control
      • Titanium Support
      • Ni200 Nickel Support
      • Stainless Steel 316 Support
      • TCR Mode
        • Three Memory Modes
      • Atomizer Resistance Lock
      • 200 to 600 Degrees Fahrenheit
      • 0.05 to 1.0 ohm
  • 1.3 Inch OLED Display Screen
    • Vertical Stack
    • Output Mode
    • Output Temperature
    • Output Power
    • Output Voltage
    • Output Current
    • Atomizer Resistance
    • Stealth Mode
  • Three Button Control Face
  • Slide and Lock Battery Access Door
    • Accepts Two High Amperage 18650 Batteries (sold separately)
  • Removable Back Panel
    • Uses 7ml Silicone Squonk Bottle
  • 2A Maximum Charging
    • Micro USB Update and Charging Port
  • Modern and Sleek Look
    • Ergonomic Shape and Feel
  • Gold Plated Spring Loaded Contacts
  • No Atomizer/Atomizer Low/Atomizer Short Circuit/Temperature Alert/10 Second Overdraw/Weak Battery/Low Power/USB and Battery Imbalance Protection/Reverse Polarity Protection

Product Dimension:
  • 42.1mm by 54.5mm by 77.2mm

Guillotine BF RDA Features:

  • 24mm Atomizer Diameter
    • 25.5mm Beauty Ring
  • Two Post Build Deck
    • Single Guillotine-Style Terminals
      • 6mm by 2mm Each Terminal
      • Double Top Mounted Hex Screws
    • Large Build Area for Specialty Coil
      • Two Included 0.28 ohm Clapton Coils
    • PEEK Insulator
    • 9mm Deep Juice Well
  • Tapered Side Airflow System
    • 10mm by 2mm Top Cap Air Slots
    • Two 3mm by 2mm Build Deck Air Slots Per Side
  • Tapered 5mm Wide 810 Bore PEI Drip Tip
    • Optional Tall 810 Bore PEI Drip Tip
  • Bottom Feed 510 Pin Included

Product Includes:
  • One Wismec Luxotic DF Box Mod
  • One Guillotine V2 RDA
  • Two Pre-Built Clapton 0.27 ohm Coils
  • One Cotton Pack
  • One Replacement Drip Tip
  • One 7ml Squonk Bottle
  • Spare Parts Bag
  • One Micro USB Cable
  • User Manual and Warning Card

Product Recommendations:
  • In order to use temperature control output, coils must be built using non-resistant wire.

Advanced User Item. Use at Your Own Risk!

NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.

All pictures are based on practicality, copyright reserved.

Share your knowledge of this product. Be the first to write a review »