Wotofo x Mr.JustRight1 Profile 24mm BF RDA
Due to the nature of manufacturing and design, each Wotofo x Mr. JustRight1 Profile 24mm BF RDA drip tip colors come in random. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random.
Wotofo has collaborated with Mr.JustRight1 to bring you the Profile 24mm BF RDA. This new atomizer features an mesh coil compatible build deck, beehive style top cap airflow, and a spring loaded central ceramic support platform. The Wotofo Profile 24mm BF RDA has a wide clamp style dual post build deck that has accommodates both mesh style coil sheets and regular performance coils. This package comes with two Wotofo Mesh Style Coils 16mm by 6.8mm sheets that have an atomizer resistance of 0.18 ohm, and a recommended wattage of 40 to 60W. These mesh strips can be perfectly shaped to fit the Profile's build deck using the included mesh bending tool. The Profile aims to solve the cotton wicking issue with most mesh RDA's with the use of a spring loaded ceramic support deck. The bottom feed pin also directly sends e-liquid to the top of the ceramic support deck, directly wicking cotton when using a mesh coil.The top cap on the Wotofo Profile has 19 1mm air holes per side, aligned with the deck to provide optimum airflow. The Wotofo Profile has a 4mm deep juice well. This package comes with a pre-installed 9mm bore 810 wide resin drip tip and an alternate grey frosted drip tip. The Profile BF RDA comes with a bottom fed gold plated 510 pin, and a standard gold plated 510 connection. The collaboration between Wotofo and Mr.JustRight1 created the Profile 24mm BF RDA; an excellent and unique rebuildable atomizer that is simple to build and amazing to vape.
Monthly Featured E-Liquids
22mm Conversion Cap
ORFR NexMESH Replacement Coils
- 24mm Diameter
- Wide Clamp Style Dual Post Build Deck
- 7mm by 2mm Each Terminal
- Side Mounted Phillips Screws
- PEEK Insulated Positive Post
- 4mm Deep Juice Well
- Interchangeable Mesh and Coil Build Styles
- Spring Loaded Central Ceramic Support
- Beehive Style Airflow
- 19 Airflow Slots Each Side
- 24K Gold Plated Bottom Feed 510 Contact
- 510 24K Gold Plated Squonk Pin
- 9mm Bore 810 Drip Tip
- Mesh Style Coil Sheets Included
- Kanthal A1
- 0.18 ohm
- 16mm by 6.8mm
- 40 to 60W Recommended Wattage
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
- One Wotofo x Mr.JustRight1 Profile 24mm RDA
- One 6mm Agleted Cotton Strip
- One Extra 810 Drip Tip
- One Mesh Bending Tool
- Two Clapton Coils
- Two Mesh Style Coil Sheets
- One Spare Parts Bag
- One User Manual
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA® and any and all of VaporDNA®'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA® will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
Rip Trippers Reviews the Wotofo x Mr.JustRight1 Profile 24mm BF RDA!