Wotofo x Suck My Mod Serpent Elevate 24mm RTA
Due to the nature of manufacturing and design, each Wotofo x Suck My Mod Serpent Elevate 24mm RTA drip tip colors come in random. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random.
Wotofo and Suck My Mod has collaborated to bring you the Serpent Elevate 24mm RTA, an amazing single coil rebuildable tank atomizer with adjustable top airflow and a gorgeous serpent scale knurled top cap. The Serpent Elevate has a unique internal chamber within the build deck to provide amazing airflow along with a leak resistant design.
The Serpent Elevate comes pre-installed with a 3.5ml capacity glass segment and also includes a 4.5ml bubble glass segment. The threaded top cap sits right above the serpent scale knurled air flow ring to reveal two juice fill ports. The Serpent Elevate differs from its predecessors with top adjustable air slots that measure in at 11mm by 2mm. The build deck of this RTA has a post-less four terminal design that is intended to fit a single coil of either clockwise or counter clockwise orientation. Each terminal is 2mm by 1.5mm and is secured by side mounted hex screws. The build deck features raised walls in order to create a seal within the internal chamber. The walls have two 3.5mm wide air slots that direct airflow below the build deck and two 1mm air holes along the side of the wall to provide additional airflow. This package comes with a coil trimming tool that helps the user trim every coil to the perfect height to optimize airflow and flavor. The Serpent Elevate also comes with a bag of agleted cotton strips and a pair of pre-built N80 framed staple Claptons that have an atomizer resistance of 0.33 ohm and a recommended range of 40 to 55W. The Serpent Elevate has a 9mm wide 810 bore drip tip that comes in a unique resin color and a frosted version, along with a 510 drip tip adapter. The body of the Serpent consist of 304 Stainless Steel, Pyrex glass, and a 24K gold plated contact. The Serpent Elevate 24mm RTA is a minimalist, yet gorgeous RTA that is made to provide amazing performance in an extremely convenient package.
Monthly Featured E-Liquids
- 24mm Diameter
- 3.5ml Tank Capacity
- 4.5ml with Bubble Tank
- High Capacity Tank Reservoir
- Threaded Top Fill
- Two Large Fill Ports
- Postless Quad Terminal Build Deck
- Single Coil Design
- 2mm by 1.5mm Terminal Slots
- Side Mounted Hex Screws
- Accommodates One Counter Clockwise or Clockwise Oriented Coil
- Airslots Into Build Deck Chamber
- Two 3.5mm Wide Build Deck Base Air Slots
- Two 1mm Diameter Air Holes Along Build Deck Chamber
- Dual 8mm by 2.5mm Wicking Ports
- PEEK Insulated
- Dual Adjustable Top Air Slots
- Snake Scale Knurled Airflow Ring
- 9mm Wide Bore Resin Drip Tip
- 510 Drip Tip Compatible
- 304 Stainless Steel and Glass Construction
- Gold Plated 510 Contact
- One Wotofo Serpent Elevate 24mm RTA
- One Bubble Glass Tank Section
- One Extra Drip Tip
- One 510 Drip Tip Adapter
- One Coil Trimming Tool
- One Pair Prebuilt Clapton Coils
- Framed Staple Clapton Coil
- (28g+38g*9+28)+36G N80
- 3mm ID
- 0.33 ohm
- Best at 40W to 55W
- One Bag 3mm Agleted Cotton Strip
- Spare Parts Pack
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.