YSTAR Nuwa 24mm BF RDA
YSTAR presents the Nuwa 24mm BF RDA, a bottom fed capable atomizer with a four terminal post-less style build deck generally made of ceramic. This package includes a standard gold plated 510 pin and a dual port gold plated squonk pin that allows juice to fill both sides of the well at the same time. The squonk can be removed with the included Allen key. The build deck features four stainless steel post-less terminals that are paired with flathead screws. The coils are intended to sit right above the air ports on both sides of the RDA. The Nuwa features two non-adjustable air ports at the bottom of the device that provides restricted airflow. The 510 drip tip is built directly into the top cap. The ceramic construction of the Nuwa provides insulation, but the height of the device keeps the RDA hot in prolonged use. The Nuwa 24mm BF RDA by YSTAR is a uniquely designed, yet practical RDA that should be part of any collection.
Monthly Featured E-Liquids
- 24mm Diameter, 28mm Tall
- Ceramic Construction
- Four Terminal Post-less Style Build Deck
- Stainless Steel Terminals
- Top Mounted Flathead Screws
- Stainless Steel Plated Deck and Screws
- Split Bottom Feeding Squonk Pin
- Air Ports Directly Below Intended Coil Placement
- Fixed Bottom Air Flow
- Gold Plated 510 Contact
- 510 Drip Tip Built Into Top Cap
- One YSTAR Nuwa 24 BF RDA
- One Squonk Pin
- One Allen Key
- One Flathead Screwdriver
- Two Spare Flathead Screws
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
RiP Trippers Reviews the YSTAR Nuwa 24mm BF RDA!