YStar Levante 24mm RDA
The Levante by Ystar is a 24mm rebuildable drip atomizer with a two post clamp style build deck, unique utilization of PEI insulator, and is 810 drip tip compatible. The Levante utilizes a two post build deck with a center screw clamp style terminals that measures at 2.5mm by 2mm per post. Coils are held down by Flathead Screws, under the build deck is an innovative PEI insulator instead of a PEEK insulator. Airflow enters the Levante through side airflow through single 6.5mm by 2mm airholes located on each side, the airflow can be adjusted or fixed by taking off the top cap, making it into a fixed open PEI top cap. The PEI construction the the Levante covers the entire top cap for better heat insulation. The gold plated 510 pin can be switched out for a squonk pin enabling the Levante to be paired with bottom feeding devices. The Levante by Ystar, with it's easy to build deck, utilization of PEI technology, and cost efficiency makes this atomizer makes amazing to have.
Monthly Featured E-Liquids
- 24mm Diameter
- Two Post Build Deck
- Center Screw Clamp Style Terminals
- Two 2.5mm by 2mm Terminals Per Post
- Top Mounted Flathead Screws
- PEI Insulator
- 6mm Deep Juice Well
- Adjustable Center Airflow
- Single Slots Per Side
- 6.5mm by 2mm Diameter Each Airhole
- 810 Drip Tip Top Cap
- 10mm Wide Bore Acrylic Drip Tip
- CNC Engraving
- Stainless Steel Construction
- Gold Plated 510 Connection
- One Levante RDA
- Spare Part Pack
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use AT YOUR OWN RISK!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.