YiHi SXMini Q Mini SX450J BT 200W Box Mod
YiHi's SXMini Q Mini Box Mod integrates the YiHi SX450J BT chip set, an ultra premium and sophisticated output board that is able to compete with the best chip developers in the industry, packed into a trim and beautiful chassis. YiHi, renown for creating chipsets found in the most sought after and high end devices, has chosen to implement their benchmark SX450J BT chipset into the SXMini Q Mini, providing an astoundingly accurate and consistent output that easily goes head to head with Evolv's top level chips. With an output range of 5 to 200W and an atomizer resistance range of 0.05 to 3.0 ohms, the Q Mini can drive output among the best in the two battery driven market segment. SXi-Q Intelligent Taste Curve technology is loaded onboard, featuring a sophisticated algorithmic calculation that allows users to set, fine tune, and save 5 output curves. YiHi's highly regarded temperature control technology is showcased to full effect in the Q Mini, with native support for standard TC heating elements, TCR functionality, with Joule and Degree based settings. The SX450J BT is also capable of Bluetooth connectivity and adjustment, allowing users to set and adjust the Q Mini from compatible phones. The OLED screen features a quadrant based display that, alongside traditional readouts, is also able to effectively display the SXi-Q graph for on device adjustment. Two high amperage 18650 batteries can be inserted through a magnetic battery access panel (batteries sold separately), with a rapid 2A maximum charge port for minimal downtime. With a quality chassis constructed from Zinc and Aluminum Alloys and YiHi's benchmark SX450J BT chipset, the SXMini Q Mini 200W Box Mod is the essential high end system for vaping enthusiasts and advanced users.
Shop All Batteries
Shop All Sub-Ohm Tanks
Monthly Featured E-Liquids
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
- YiHi SX450J BT Chip Set
- 5 to 200W
- 1.0 to 95V
- 0.05 to 3.0 ohm Atomizer Resistance Range
- SXi-Q Intelligent Taste Curve
- Set Output Curve
- 5 Bank Memory
- Temperature Control
- Joule Mode
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- TCR Functionality
- Temperature Coefficient of Resistivity
- Resistance Read and Lock
- 212 to 572 Degrees Fahrenheit
- Bluetooth Compatible
- Custom Set Logo
- Change Settings from Phone
- Three Button Control Face
- Oversized Firing Button
- Adjustment Buttons
- Quadrant Based OLED Display
- Output Wattage
- Output Voltage
- Output Temperature
- Battery Life Indicator
- Battery Voltage
- Atomizer Resistance
- Work Mode
- SXi-Q Graph
- Micro USB Charge and Update Port
- Magnetic Battery Access Panel
- Accepts Two High Amperage 18650 Batteries
- Sold Separately
- Zinc Alloy and Aluminum Alloy Construction
- Stainless Steel Accenting
- 24mm Stainless Steel 510
- Spring Loaded Gold Plated 510 Connection
- Reverse Polarity/Short/Low Resistance/Low Battery/Overheat Protection
- One SXMini Q Mini 200W TC Box Mod
- One Micro USB Cable
- User Manual
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use At Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.