dotmod Petri V2 Cloud Edition Two Post RDA
The dotmod Inc Petri V2 Cloud Edition Two Post RDA is the full stainless chassis version of the Petri V2 that adds additional airflow as well as integrating three terminals per post to create the most vapor centric Petri system released thus far. Measuring 22mm in diameter, the Petri V2 Cloud Edition features a two post design with expanded functionality, integrating three terminals per post. The central terminal measures 3mm in diameter, with enough capacity to hold complex, clapton sized leads. Additionally, dual 1.5mm terminals are positioned directly above each central terminal on each post to allow for even more coil versatility. dotmod's Signature custom machined knurled screws feature a large surface area alongside a Phillips top that allows users to either finger or tool tighten, while the flat bottom surface fits snugly against the interior of each post for improved conductivity. The deck of the Petri V2 is covered by PEEK, which minimizes heat transfer to the 510 insulator to improve durability and performance under high heat output. The Petri V2 features a classic three piece assembly with the Cloud Edition featuring full Stainless Steel construction for added durability and a higher quality feel. The Cloud Edition features expanded airflow, with three 2.5mm diameter airholes arranged in a triangular pattern per side, providing ample and efficient direct to chamber airflow. Included with each set are three delrin drip tip sleeves (black, clear, and white) that users can install depending on style preference, surrounding the proprietary 9mm diameter bore drip tip.
- 22mm Diameter
- Builder Friendly Two Post Design
- Three Terminals Per Post
- 3mm Central Terminal
- Dual 1.5mm Auxiliary Terminals
- Allows for a Huge Variety of Coil Structure Compatibility
- Custom Machined Knurled Screws
- Larger Surface Area
- Tool or Hand Tighten
- Flat Bottom for Secureness
- PEEK Covered Deck
- Minimizes Heat Transfer to Insulator
- Heat Resistant
- High Performance Orientated
- Three Piece Assembly
- Beveled Top Cap
- Airflow Travels Smoothly to Drip Tip Section
- Triple 2.5mm Airholes Airflow
- Per Side
- Triangular Arrangement
- Includes Three Drip Tip Sleeves
- White, Clear, and Black Delrin
- 9mm Bore
- Double O-Ring Sealed
- Built into Top Cap
- 24K Gold Plated 510 Connection
- One dotmod Petri V2 Cloud Edition RDA
- Three Drip Tip Sleeves
- White, Clear, and Black Delrin
- Spare O-Rings and Hex Key
- Spare Screws
- Certificate of Authenticity
- dotmod Display and Carry Box
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
RiP Trippers Review of the dotmod Petri V2 Cloud Edition!