iJoy Diamond Mini 225W Starter Kit
iJoy introduces the Diamond Mini 225W Starter Kit, a miniaturized version of the Diamond PD270 234W, continuing the aesthetics of the original, the beautiful chassis was inspired by the multi-faceted diamond cutting technology, and is paired with the Diamond Sub-Ohm Tank. The Diamond Mini Box Mod's chipset is designed by IWEPAL, and has a maximum output of 225W, and features a 0.96 inch OLED screen that is seamlessly blended into the panel, giving the device a unique and classy look. The Diamond Mini also features a full temperature control suite and USB charging. The iJoy Diamond Mini is paired with the Diamond Sub-Ohm Tank, a 25mm diameter tank with slide-to-fill top fill capability and a 5.5ml E-Juice capacity with the bubble glass, and a 4.0ml juice capacity with the standard glass tube. The Diamond Sub-Ohm tank is compatible with the DM Coil Family and comes pre-installed with the DM-Mesh coil and the DM-DM coil head. Airflow enters the Diamond Sub-Ohm Tank via dual adjustable 12.5mm by 2.5mm bottom airflow and a wide bore 810 delrin drip tip. The gorgeous Diamond Mini 225W Starter Kit is an excellent redesign of the original that caters to users that want the same performance that the Diamond delivers in a smaller package.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Shop All Batteries
Monthly Featured E-Liquids
iJoy Diamond Mini 225W Box Mod:
- New 225W Chip Set
- 5 to 225W Output Wattage
- 1 to 8V Output Voltage
- 1.0A to 4.0A Output Current
- Reverse Polarity Protection
- Firmware Upgradable
- Full Temperature Control
- Titanium Support
- Ni200 Nickel Support
- Stainless Steel 316 Support
- TCR Mode
- Atomizer Resistance Lock
- 200 to 600 Degrees Fahrenheit
- 0.05 to 3.0 ohm Minimum Atomizer Resistance
- 0.96 inch OLED Display Screen
- Vertical Stack
- Output Mode
- Output Temperature
- Output Power
- Output Voltage
- Output Current
- Atomizer Resistance
- Puff Counter
- Individual Battery Life Indicators
- Three Button Control Face
- Chassis Inspired by Multi-Faceted Diamond Cutting Technology
- Magnetized Battery Access Door
- Accepts Two High Amperage 18650 Batteries (sold separately unless otherwise stated)
- 2A Maximum Charging
- Micro USB Update and Charging Port
- Spring Loaded Stainless Steel 510 Connection
- PCB Temperature Overheat/Low Power/PCB Atomizer Short/ No Atomizer/Low Resistance/Ohms Too High Protection
iJoy Diamond Sub-Ohm Tank Features:
- 25mm Diameter
- Sliding Top Fill System
- Pour to Fill
- 5.5ml Bubble Glass Maximum Capacity
- 4.0ml Regular Glass Maximum Capacity
- Diamond Coil Family
- 0.15 ohm
- 40 to 90W
- DM-DM Coil
- Dual Adjustable Bottom Airflow
- 12.5mm by 2.5mm Each Airslot
- Fully Closeable
- 8mm Wide Bore Delrin 810 Drip Tip
- 510 Drip Tip Adapter
- One iJoy Diamond Mini 225W Box Mod
- One iJoy Diamond Sub-Ohm Tank
- 810 Delrin Drip Tip
- 510 Drip Tip Adapter
- One DM-Mesh 0.15 ohm Coil Head
- One DM-DM Coil 0.15 ohm Coil Head
- One 4.0 ml Replacement Glass
- Spare Parts Pack
- One QC Micro USB Cable
- User Manual
- Warning Card
- In order to use temperature control output, coils must be built using non-resistant wire.
Advanced User Item. Use at Your Own Risk!
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.
Rip Trippers Reviews the iJoy Diamond Mini 225W Starter Kit!